4.Remove the cap from the gas pressure regulator using a
NOTE: Do not remove the spring beneath the cap.
A
A.Cap
5.Turn the cap over so the LP is visible.
A
A. Cap
6.Reinstall the cap.
To Convert Surface Burners
1.Remove burner grate, burner caps and burners.
A
B
A. Burner cap
B.Burner
2.Locate LP gas orifice spuds for top burners in the literature bag included with the range. Two LP gas spuds are stamped “88” and two “78.”
3.Remove Natural gas orifice spuds using a 7 mm combination wrench.
4.Install LP gas orifice spuds using a 7 mm combination wrench.
A
B
A.Spud
B.Holder
NOTE: This range cooktop is equipped with 2 standard burners and 2 super burners. Spud size and location remain the same.
Standard | Super |
Burner 78 | Burner 88 |
Super | Standard |
Burner 88 | Burner 78 |
5.Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature.
6.Reinstall burners, burner caps and burner grates.
15