Whirlpool W10258095A Moving the Range, For power supply cord-connected ranges

Page 12

Moving the Range

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, slide range onto cardboard or hardboard to avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

For power supply cord-connected ranges:

1.Slide range forward.

2.Unplug the power supply cord.

3.Complete cleaning or maintenance.

4.Plug in power supply cord.

5.To check that anti-tip bracket is installed, use a flashlight and look underneath the bottom of the range:

Look for the anti-tip bracket securely attached to floor or wall.

Slide range back so rear range foot is under anti-tip bracket.

For direct-wired ranges:

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Slide range forward.

3.Complete cleaning or maintenance.

4.To check that anti-tip bracket is installed, use a flashlight and look underneath the bottom of the range:

Look for the anti-tip bracket securely attached to floor or wall.

Slide range back so rear range foot is under anti-tip bracket.

5.Check that range is level.

6.Reconnect power.

6.Check that range is level.

W10258095A

© 2009. Whirlpool Corporation.

4/09

All rights reserved.

Printed in U.S.A.

Image 12
Contents Range Safety Table of ContentsInstallation Requirements Tools and PartsLocation Requirements Cabinet Dimensions If connecting to a 4-wire systemElectrical Requirements Electrical ConnectionInstallation Instructions If connecting to a 3-wire systemUnpack Range On Ranges Equipped with Storage DrawersInstall Anti-Tip Bracket Floor MountingWall Mounting Power Supply Cord Direct WireStyle 1 Power supply cord strain relief Style 2 Direct wire strain reliefWire connection Power Supply Cord #10-32 hex nut Green ground wire Ground-link screw Direct Wire Installation Copper or Aluminum Wire Wire Connection Direct WireBare Wire Torque Specifications Wire Awg TorqueTerminal block Line Red wire Complete Installation If you need Assistance or ServiceVerify Anti-Tip Bracket Location Level RangeFor power supply cord-connected ranges For direct-wired rangesMoving the Range W10258095A