Whirlpool W10258095A Electrical Connection, Power Supply Cord, Direct Wire

Page 6

Electrical Connection

Power Supply Cord

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use a new 40 amp power supply cord.

Plug into a grounded outlet.

Failure to follow these instructions can result in death, fire, or electrical shock.

Direct Wire

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge copper or 6 gauge aluminum wire.

Electrically ground range.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Disconnect power.

2.Use Phillips screwdriver to remove the terminal block cover screw located on the back of the range.

3.Remove plastic tag holding three #10-32 hex nuts from the middle post of the terminal block.

4.Add strain relief.

Style 1: Power supply cord strain relief

Assemble a UL listed strain relief in the opening.

A

B

A. UL listed strain relief - large opening

B. Small opening

Feed the power supply cord through the strain relief on the cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block.

Tighten strain relief screw against the power supply cord.

Style 2: Direct wire strain relief

Use Phillips screwdriver to remove screws and rotate/ conduit plate 180º.

B

A

A. Large opening

B. Small opening

6

Image 6
Contents Range Safety Table of ContentsInstallation Requirements Tools and PartsLocation Requirements Electrical Requirements Cabinet DimensionsIf connecting to a 4-wire system Electrical ConnectionUnpack Range Installation InstructionsIf connecting to a 3-wire system On Ranges Equipped with Storage DrawersInstall Anti-Tip Bracket Floor MountingWall Mounting Style 1 Power supply cord strain relief Power Supply CordDirect Wire Style 2 Direct wire strain reliefWire connection Power Supply Cord #10-32 hex nut Green ground wire Ground-link screw Bare Wire Torque Specifications Direct Wire Installation Copper or Aluminum WireWire Connection Direct Wire Wire Awg TorqueTerminal block Line Red wire Verify Anti-Tip Bracket Location Complete InstallationIf you need Assistance or Service Level RangeMoving the Range For power supply cord-connected rangesFor direct-wired ranges W10258095A