AMX DAS-T0808-SIG, DAS-T0804-SIG System Setup Mode screen, System Setup MRC Setup Mode screen

Page 39

Setup and Configuration

System Setup Mode screen

Select Setup from the Main Menu screen to access the System Setup Mode screen (FIG. 23):

Exits this screen

To the Clock screens

To the Tuner screens

To the System Setup Mode screen

FIG. 23 System Setup Mode screen options

The acronym "MRC" stands for "Multi Room Controller", and refers to the Matrix Audio Controller.

Options on the System Setup Mode screen include:

MRC - Accesses the MRC Setup Mode screen, where you can program sources and adjust the input attenuation & output gain for each source, as well as configure Paging.

Tuner - Accesses the Tuner Setup screens, where you can set the presets for each tuner detected.

“Tuner” will only be displayed if a tuner module(s) is detected on board the Controller.

Clock - Accesses the Clock Setup Mode screens, where you can set the time and view the alarms that have been set for each room/zone.

Exit - Exits the System Setup Mode screen.

System Setup - MRC Setup Mode screen

Select MRC from the System Setup Mode screen (FIG. 23) to access the MRC Setup Mode screen (FIG. 24).

Exits this screen

To the About screens

To the Backlight screens

To the MRC Setup Mode screens

FIG. 24 MRC Setup Mode screen options

The options on this screen include:

Setup - Accesses the MRC Setup Mode Options screen where you can program sources and adjust the input attenuation & output gain for each source.

Backlight - Accesses the MRC Backlight screen.

About - Accesses the About screen, which displays the firmware version of the Controller, Zone Expanders and all connected keypads.

Exit - returns to the previous screen.

Tango Series Audio Controllers

27

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Tango AMX Limited Warranty and Disclaimer Important Safety Instructions Important Safety Instructions Table of Contents System Integration Drawings Tuner Modules IR Commands By Source Type Mdrg Troubleshooting No Keypad Activity At All Table of Contents Viii Tango Series Audio Controllers Overview Tango Series Audio ControllersRear Panel Components Product SpecificationsTango Audio Controllers Product Specifications Front Panel ComponentsDAS-TRMK Rack Mount Kit for Tango Audio Controllers and Zone Tango Series Audio Controllers Installation Rack-MountingVentilation Cable Type Speaker Wire Technology SWTCabling Installation Instructions Connector Layout Rear PanelConnecting Sources Audio Inputs/Outputs Connecting IR OutputsConnecting Zone Outputs SWT Connectors Connecting SWT Keypads to the Tango ControllerConnecting SWT Speakers to SWT Keypads Connecting Tango Zone Expanders Connecting Paging Inputs/OutputsFrom Audio Device L/R To Zones Zone Expander Addressing DAS-T0808-SIG 8-Zone ControllerDAS-T0804-SIG 4-Zone Controller RS-232 Cable Connecting the RS-232 Serial PortAntenna Installation On-Board AM/FM Tuner ModuleWiring Diagram Connecting a Tango AmplifierMIO-R1 Audio Tango Distributed Audio Remote Control SpecificationsMIO R-1 Audio Specifications Installing Custom Buttons Programming The MIO R-1 Audio Using KeypadBuilder Battery Low IndicatorInserting Batteries into The MIO R-1 Audio Tone Control & SRS Setting SRS Bass Boost, Focus, 3D and WOW SettingsZone Control Satellite and Other Source ControlInternal Tuner and Audio Server CD and DVDConfiguration Mode Direct Numeric AccessAdditional Documentation Battery TypeLED Sleep Mode Brightness LED Awake BrightnessSWT Distributed Audio Systems Using Four Conductor Speaker WireUsing the Audio Zone Expander System Integration DrawingsRF Interference SWT Special Wiring ConfigurationsDistribution Wiring Auxiliary Amplifier ConfigurationWire Configurations Keypad for Control Only Remote Amplifier ConfigurationSplit Zone / Analog Volume control Option 2 one Keypad Split Zone / Analog Volume Control Option 1 One KeypadProgramming Worksheets Setup and ConfigurationSource Documentation Key-By-Key ProgrammingProgramming the Tango Controller Main Menu screenProgramming Panel System Setup MRC Setup Mode screen System Setup Mode screenProgramming Source Equipment MRC Setup Mode Options screenIR OK 50 percent sure 1 command received Learn IR CommandsAdjusting Input Attenuation Setting Gain/AttenuationInput Attenuation Mode screen Adjusting Output GainSetting Paging Volume Room Control SettingsPaging Selecting Stereo/Mono System Setup Tuner Setup Mode screenSetting Presets Selecting AM/FMSetting the Day of the week System Setup Clock Setup Mode screenSetting System Time Setting System DateBacklight Intensity Backlight OptionsBacklight Mode About Options screenDevice Status Program LCD KP System Setup Mode AboutSetup and Configuration Tango Series Audio Controllers Tuner Modules DAS-AMFM TunerDAS-SIRIUS Tuner Top = Slot Bottom = Slot Front Setting the Jumpers Audio Controller Jumpers ON/OFF SettingsAudio Controller Jumpers Location DAS-AMFM Tuner Module Jumpers Audio Controller Jumpers Dual Tuner SettingRemoving the Pre-Installed DAS-AMFM Tuner Module Rear Panel Tuner Slots 1 Installing a Second DAS-AMFM Tuner ModuleRibbon Cable Tuner Cable Routing Installing the DAS-SIRIUS Tuner ModuleModule Connecting and Positioning the Sirius AntennaActivating Your Sirius Subscription Mi-Series & Tango Controllers Port Mapping AMX Duet Module Interface SpecificationsPort Mapping ChannelsTango Controllers Channels Mi-Series & Tango Controllers Levels Command ControlMi-Series & Tango Controllers Command Control LevelsPassback ?FWVERSION?INPUT Input?VERSION Tunerpresetsave?PROPERTY ReinitFwversion Command FeedbackMi-Series & Tango Controllers Command Feedback BandVersion ProductidProperty TunemodeSource Commands Referenced by Source Type Input Source TypesOther External IR Commands By Source Type Learn IR by Source TypeCD CD SAT Satellite DVD DVDAudio Audio ServerOther Other = Seek Down Matrix OnboardNetwork Communication Serial Control StringsGeneral Information Serial Port CommunicationMgcf Command MessagesCommand Messages MverBdlo AMXMgbd BdhiMGTRr MSBSr,bMGBSr MSTRr,tMSSRr,s MSAOsMSSCr,s MGSCrMGSRr MSGLs,i,oMGGLs MGPVr MSPGr,sMGPGr MSPVr,vMGSTr MCMDs,x, y MSSTs,xMGPRr MSBLr,xMGBLr MSPRr,xMARGg,r MSRGs,b8,b7B6,b5,b4,b3 B2,b1MGRGr MRRGrMdrg MDRGzMSFVr,s,f MDGVr,iMSGVr,v MGRSsMglo MGFVr,sMSLOr MCLOrMGPSs,n MRPSs,nMSTPs MSSDs,d Satellite Receiver ‘ssss’ where ‘ssss’ is the station numberCCALr MGSSsCSSTh,m,s CgstSgid Status Codes for Sirius Tuner Mcmd Command CodesMcmd Command Codes Status Codes for Sirius TunerStatus Messages Status MessagesMASOFF0 MRGSz,s,b8,b7,b6 MBALr,xMPRVr,x MGSTr,v,bb,t,s,r,z,l,pMSTPs,t MFAVr,s,fMLOTb8,b7,b6 MPRSs,n,pRSIDx,y CSTv,h,m,sCALMr,s,v,h,m RSSTx,y,zSource Unit Connections TroubleshootingPower Connections Symptom Possible Causes SectionSource Connections Zone Connection ProblemsDead Zones LED Does Not lightKeypad Lights, No Sound No Keypad Activity At AllProgramming Troubleshooting Tango Series Audio Controllers It’s Your World Take Control

DAS-T0808-SIG, DAS-T0804-SIG specifications

The AMX DAS-T0804-SIG and DAS-T0808-SIG are the forefront of advanced data distribution systems, designed to cater to the dynamic needs of commercial audio-visual installations. These models provide exceptional performance in managing and distributing various signals efficiently, ensuring seamless integration with a wide array of multimedia components.

One of the standout features of the DAS-T0804-SIG is its ability to support up to four output signals, while the DAS-T0808-SIG extends this capability to eight outputs. This scalability makes both units ideal for projects requiring flexible signal routing, whether for corporate environments, educational institutions, or entertainment venues.

Both models leverage cutting-edge digital signal processing (DSP) technologies to enhance audio quality and ensure fidelity during signal transmission. The units are equipped with advanced signal management features, including automatic gain control and equalization, which help maintain consistent audio levels and optimize playback across different environments. This ensures that users experience high-quality sound without the hassle of manual adjustments.

Connectivity options are plentiful, with support for both HDMI and analog inputs. The HDMI ports allow for seamless integration with high-definition video sources, while the analog inputs cater to older equipment, making the DAS-T0804-SIG and DAS-T0808-SIG versatile choices for mixed-system setups. The ability to handle diverse input types helps manage the challenges of modern AV environments, where devices can vary widely.

Another notable characteristic is the intuitive user interface that facilitates easy configuration and operation. The models come equipped with LED indicators for monitoring signal status, which provide real-time feedback and help troubleshoot issues swiftly. This user-centric design is particularly beneficial for installation professionals who require efficient workflows.

The DAS-T0804-SIG and DAS-T0808-SIG are also built with robust security features to protect against unauthorized access and ensure integrity in signal transmission. This is increasingly crucial in settings where sensitive information may be communicated.

In summary, the AMX DAS-T0804-SIG and DAS-T0808-SIG systems are powerful, flexible, and secure solutions for modern AV installations, characterized by their advanced signal processing, versatile connectivity, and intuitive design. Their ability to accommodate a variety of applications makes them an essential tool for any professional seeking to optimize audio-visual performance.
Top Page Image Contents