AMX DAS-T0804-SIG, DAS-T0808-SIG manual About Options screen, Backlight Mode, Device Status

Page 48

Setup and Configuration

When you return to the Backlight Intensity options screen, the selected intensity setting will appear in brackets.

To exit the screen, select Quit.

Backlight - Mode

Select Mode to access the Backlight Mode options screen (FIG. 48):

Return to the previous screen

Select an mode setting

FIG. 48 Backlight Mode options screen

To change the backlight Mode, select the option (i.e. Auto On, Always On, or Always Off).

Auto On (default): The backlight will remain on when accessing and using the Setup/Programming Menus from the front of the Controller. 30 seconds after exiting the Menus, the backlight will turn off.

Always On: backlight remains on at all times

Always Off: backlight remains off at all times, even when accessing the Setup/Programming Menus.

When you return to this screen, the option chosen will appear in brackets. To exit the screen, select Quit.

About Options screen

Select About from the Main Menu screen (FIG. 22) to display the About Options screen (FIG. 49):

Return to the previous screen

To the Reprogram LCD Keypad scree

To the Device Status screen

FIG. 49 About options screen

Device Status

The Device Status menu displays the software version for the following components (where applicable): Multi Room Controller (MRC)

Expansion Units 1 – 7 (X1 – X7)

All Main Keypads & Aux Keypads connected to the main Controller All Main Keypads & Aux Keypads connected to each Zone Expander

1.From the System Setup Mode screen, select About (FIG. 50):

36

Tango Series Audio Controllers

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Tango AMX Limited Warranty and Disclaimer Important Safety Instructions Important Safety Instructions Table of Contents System Integration Drawings Tuner Modules IR Commands By Source Type Mdrg Troubleshooting No Keypad Activity At All Table of Contents Viii Tango Series Audio Controllers Tango Series Audio Controllers OverviewProduct Specifications Tango Audio Controllers Product SpecificationsFront Panel Components Rear Panel ComponentsDAS-TRMK Rack Mount Kit for Tango Audio Controllers and Zone Tango Series Audio Controllers Installation Rack-MountingVentilation Speaker Wire Technology SWT Cabling Installation InstructionsConnector Layout Rear Panel Cable TypeConnecting Sources Audio Inputs/Outputs Connecting IR OutputsConnecting Zone Outputs SWT Connectors Connecting SWT Keypads to the Tango ControllerConnecting SWT Speakers to SWT Keypads Connecting Paging Inputs/Outputs Connecting Tango Zone ExpandersFrom Audio Device L/R To Zones Zone Expander Addressing DAS-T0808-SIG 8-Zone ControllerDAS-T0804-SIG 4-Zone Controller Connecting the RS-232 Serial Port Antenna InstallationOn-Board AM/FM Tuner Module RS-232 CableConnecting a Tango Amplifier Wiring DiagramMIO-R1 Audio Tango Distributed Audio Remote Control SpecificationsMIO R-1 Audio Specifications Installing Custom Buttons Programming The MIO R-1 Audio Using KeypadBuilder Battery Low IndicatorInserting Batteries into The MIO R-1 Audio Tone Control & SRS Setting SRS Bass Boost, Focus, 3D and WOW SettingsZone Control Source Control Internal Tuner and Audio ServerCD and DVD Satellite and OtherDirect Numeric Access Configuration ModeBattery Type LED Sleep Mode BrightnessLED Awake Brightness Additional DocumentationUsing Four Conductor Speaker Wire Using the Audio Zone ExpanderSystem Integration Drawings SWT Distributed Audio SystemsSWT Special Wiring Configurations Distribution WiringAuxiliary Amplifier Configuration RF InterferenceRemote Amplifier Configuration Wire Configurations Keypad for Control OnlySplit Zone / Analog Volume Control Option 1 One Keypad Split Zone / Analog Volume control Option 2 one KeypadSetup and Configuration Source DocumentationKey-By-Key Programming Programming WorksheetsProgramming the Tango Controller Main Menu screenProgramming Panel System Setup Mode screen System Setup MRC Setup Mode screenMRC Setup Mode Options screen Programming Source EquipmentLearn IR Commands IR OK 50 percent sure 1 command receivedSetting Gain/Attenuation Adjusting Input AttenuationAdjusting Output Gain Input Attenuation Mode screenSetting Paging Volume Room Control SettingsPaging System Setup Tuner Setup Mode screen Setting PresetsSelecting AM/FM Selecting Stereo/MonoSystem Setup Clock Setup Mode screen Setting System TimeSetting System Date Setting the Day of the weekBacklight Options Backlight IntensityBacklight Mode About Options screenDevice Status System Setup Mode About Program LCD KPSetup and Configuration Tango Series Audio Controllers Tuner Modules DAS-AMFM TunerDAS-SIRIUS Tuner Top = Slot Bottom = Slot Front Setting the Jumpers Audio Controller Jumpers ON/OFF SettingsAudio Controller Jumpers Location Audio Controller Jumpers Dual Tuner Setting DAS-AMFM Tuner Module JumpersRemoving the Pre-Installed DAS-AMFM Tuner Module Installing a Second DAS-AMFM Tuner Module Rear Panel Tuner Slots 1Ribbon Cable Tuner Installing the DAS-SIRIUS Tuner Module Cable RoutingConnecting and Positioning the Sirius Antenna ModuleActivating Your Sirius Subscription AMX Duet Module Interface Specifications Port MappingChannels Mi-Series & Tango Controllers Port MappingTango Controllers Channels Command Control Mi-Series & Tango Controllers Command ControlLevels Mi-Series & Tango Controllers Levels?FWVERSION ?INPUTInput PassbackTunerpresetsave ?PROPERTYReinit ?VERSIONCommand Feedback Mi-Series & Tango Controllers Command FeedbackBand FwversionProductid PropertyTunemode VersionSource Commands Referenced by Source Type Input Source TypesOther External IR Commands By Source Type Learn IR by Source TypeCD CD DVD DVD SAT SatelliteAudio Audio ServerOther Other Matrix Onboard = Seek DownSerial Control Strings General InformationSerial Port Communication Network CommunicationCommand Messages Command MessagesMver MgcfAMX MgbdBdhi BdloMSBSr,b MGBSrMSTRr,t MGTRrMSAOs MSSCr,sMGSCr MSSRr,sMGSRr MSGLs,i,oMGGLs MSPGr,s MGPGrMSPVr,v MGPVrMGSTr MSSTs,x MCMDs,x, yMSBLr,x MGBLrMSPRr,x MGPRrMSRGs,b8,b7 B6,b5,b4,b3B2,b1 MARGg,rMRRGr MdrgMDRGz MGRGrMDGVr,i MSGVr,vMGRSs MSFVr,s,fMGFVr,s MSLOrMCLOr MgloMGPSs,n MRPSs,nMSTPs Satellite Receiver ‘ssss’ where ‘ssss’ is the station number MSSDs,dMGSSs CSSTh,m,sCgst CCALrSgid Mcmd Command Codes Mcmd Command CodesStatus Codes for Sirius Tuner Status Codes for Sirius TunerStatus Messages Status MessagesMASOFF0 MBALr,x MPRVr,xMGSTr,v,bb,t,s,r,z,l,p MRGSz,s,b8,b7,b6MFAVr,s,f MLOTb8,b7,b6MPRSs,n,p MSTPs,tCSTv,h,m,s CALMr,s,v,h,mRSSTx,y,z RSIDx,yTroubleshooting Power ConnectionsSymptom Possible Causes Section Source Unit ConnectionsZone Connection Problems Dead ZonesLED Does Not light Source ConnectionsNo Keypad Activity At All Keypad Lights, No SoundProgramming Troubleshooting Tango Series Audio Controllers It’s Your World Take Control

DAS-T0808-SIG, DAS-T0804-SIG specifications

The AMX DAS-T0804-SIG and DAS-T0808-SIG are the forefront of advanced data distribution systems, designed to cater to the dynamic needs of commercial audio-visual installations. These models provide exceptional performance in managing and distributing various signals efficiently, ensuring seamless integration with a wide array of multimedia components.

One of the standout features of the DAS-T0804-SIG is its ability to support up to four output signals, while the DAS-T0808-SIG extends this capability to eight outputs. This scalability makes both units ideal for projects requiring flexible signal routing, whether for corporate environments, educational institutions, or entertainment venues.

Both models leverage cutting-edge digital signal processing (DSP) technologies to enhance audio quality and ensure fidelity during signal transmission. The units are equipped with advanced signal management features, including automatic gain control and equalization, which help maintain consistent audio levels and optimize playback across different environments. This ensures that users experience high-quality sound without the hassle of manual adjustments.

Connectivity options are plentiful, with support for both HDMI and analog inputs. The HDMI ports allow for seamless integration with high-definition video sources, while the analog inputs cater to older equipment, making the DAS-T0804-SIG and DAS-T0808-SIG versatile choices for mixed-system setups. The ability to handle diverse input types helps manage the challenges of modern AV environments, where devices can vary widely.

Another notable characteristic is the intuitive user interface that facilitates easy configuration and operation. The models come equipped with LED indicators for monitoring signal status, which provide real-time feedback and help troubleshoot issues swiftly. This user-centric design is particularly beneficial for installation professionals who require efficient workflows.

The DAS-T0804-SIG and DAS-T0808-SIG are also built with robust security features to protect against unauthorized access and ensure integrity in signal transmission. This is increasingly crucial in settings where sensitive information may be communicated.

In summary, the AMX DAS-T0804-SIG and DAS-T0808-SIG systems are powerful, flexible, and secure solutions for modern AV installations, characterized by their advanced signal processing, versatile connectivity, and intuitive design. Their ability to accommodate a variety of applications makes them an essential tool for any professional seeking to optimize audio-visual performance.
Top Page Image Contents