AMX DAS-T0808-SIG, DAS-T0804-SIG manual Backlight Options, Backlight Intensity

Page 47

Setup and Configuration

FIG. 44 No Alarms

3.If an alarm has been set for any room/zone, the room number, source number and alarm time are displayed (FIG. 45):

FIG. 45 Example: Alarm Room 1

“Next” will scroll forward through all set Alarms.

Backlight Options

Select Backlight from the Main Menu screen to access the Backlight Options screen (FIG. 46). Use the Backlight options to control when, and how bright the backlight will appear on the Controller’s LCD screen.

Return to the Main Menu screen

To the Backlight Modes screen

To the Backlight Intensity screen

FIG. 46 Backlight Options screen

The options on this screen include:

Intensity - Sets the intensity of the Controller’s LCD screen (Backlight) Mode - Sets the Backlight Mode

Quit - returns to the previous screen

Backlight - Intensity

Select Intensity to access the Backlight Intensity options screen (FIG. 47), where you can set the intensity of the Controller’s LCD screen:

Return to the previous screen

Select an intensity setting

FIG. 47 Backlight Intensity options screen

To change the backlight intensity, select the option (i.e. 25%, 50%, 75% or Full), the backlight will dim to the selected value.

Tango Series Audio Controllers

35

 

 

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Tango AMX Limited Warranty and Disclaimer Important Safety Instructions Important Safety Instructions Table of Contents System Integration Drawings Tuner Modules IR Commands By Source Type Mdrg Troubleshooting No Keypad Activity At All Table of Contents Viii Tango Series Audio Controllers Overview Tango Series Audio ControllersRear Panel Components Product SpecificationsTango Audio Controllers Product Specifications Front Panel ComponentsDAS-TRMK Rack Mount Kit for Tango Audio Controllers and Zone Tango Series Audio Controllers Ventilation InstallationRack-Mounting Cable Type Speaker Wire Technology SWTCabling Installation Instructions Connector Layout Rear PanelConnecting Zone Outputs Connecting Sources Audio Inputs/OutputsConnecting IR Outputs Connecting SWT Speakers to SWT Keypads SWT ConnectorsConnecting SWT Keypads to the Tango Controller Connecting Tango Zone Expanders Connecting Paging Inputs/OutputsFrom Audio Device L/R To Zones DAS-T0804-SIG 4-Zone Controller Zone Expander AddressingDAS-T0808-SIG 8-Zone Controller RS-232 Cable Connecting the RS-232 Serial PortAntenna Installation On-Board AM/FM Tuner ModuleWiring Diagram Connecting a Tango AmplifierMIO R-1 Audio Specifications MIO-R1 Audio Tango Distributed Audio Remote ControlSpecifications Installing Custom Buttons Inserting Batteries into The MIO R-1 Audio Programming The MIO R-1 Audio Using KeypadBuilderBattery Low Indicator Zone Control Tone Control & SRS SettingSRS Bass Boost, Focus, 3D and WOW Settings Satellite and Other Source ControlInternal Tuner and Audio Server CD and DVDConfiguration Mode Direct Numeric AccessAdditional Documentation Battery TypeLED Sleep Mode Brightness LED Awake BrightnessSWT Distributed Audio Systems Using Four Conductor Speaker WireUsing the Audio Zone Expander System Integration DrawingsRF Interference SWT Special Wiring ConfigurationsDistribution Wiring Auxiliary Amplifier ConfigurationWire Configurations Keypad for Control Only Remote Amplifier ConfigurationSplit Zone / Analog Volume control Option 2 one Keypad Split Zone / Analog Volume Control Option 1 One KeypadProgramming Worksheets Setup and ConfigurationSource Documentation Key-By-Key ProgrammingProgramming Panel Programming the Tango ControllerMain Menu screen System Setup MRC Setup Mode screen System Setup Mode screenProgramming Source Equipment MRC Setup Mode Options screenIR OK 50 percent sure 1 command received Learn IR CommandsAdjusting Input Attenuation Setting Gain/AttenuationInput Attenuation Mode screen Adjusting Output GainPaging Setting Paging VolumeRoom Control Settings Selecting Stereo/Mono System Setup Tuner Setup Mode screenSetting Presets Selecting AM/FMSetting the Day of the week System Setup Clock Setup Mode screenSetting System Time Setting System DateBacklight Intensity Backlight OptionsDevice Status Backlight ModeAbout Options screen Program LCD KP System Setup Mode AboutSetup and Configuration Tango Series Audio Controllers DAS-SIRIUS Tuner Tuner ModulesDAS-AMFM Tuner Top = Slot Bottom = Slot Front Audio Controller Jumpers Location Setting the JumpersAudio Controller Jumpers ON/OFF Settings DAS-AMFM Tuner Module Jumpers Audio Controller Jumpers Dual Tuner SettingRemoving the Pre-Installed DAS-AMFM Tuner Module Rear Panel Tuner Slots 1 Installing a Second DAS-AMFM Tuner ModuleRibbon Cable Tuner Cable Routing Installing the DAS-SIRIUS Tuner ModuleModule Connecting and Positioning the Sirius AntennaActivating Your Sirius Subscription Mi-Series & Tango Controllers Port Mapping AMX Duet Module Interface SpecificationsPort Mapping ChannelsTango Controllers Channels Mi-Series & Tango Controllers Levels Command ControlMi-Series & Tango Controllers Command Control LevelsPassback ?FWVERSION?INPUT Input?VERSION Tunerpresetsave?PROPERTY ReinitFwversion Command FeedbackMi-Series & Tango Controllers Command Feedback BandVersion ProductidProperty TunemodeOther External Source Commands Referenced by Source TypeInput Source Types CD CD IR Commands By Source TypeLearn IR by Source Type SAT Satellite DVD DVDOther Other AudioAudio Server = Seek Down Matrix OnboardNetwork Communication Serial Control StringsGeneral Information Serial Port CommunicationMgcf Command MessagesCommand Messages MverBdlo AMXMgbd BdhiMGTRr MSBSr,bMGBSr MSTRr,tMSSRr,s MSAOsMSSCr,s MGSCrMGGLs MGSRrMSGLs,i,o MGPVr MSPGr,sMGPGr MSPVr,vMGSTr MCMDs,x, y MSSTs,xMGPRr MSBLr,xMGBLr MSPRr,xMARGg,r MSRGs,b8,b7B6,b5,b4,b3 B2,b1MGRGr MRRGrMdrg MDRGzMSFVr,s,f MDGVr,iMSGVr,v MGRSsMglo MGFVr,sMSLOr MCLOrMSTPs MGPSs,nMRPSs,n MSSDs,d Satellite Receiver ‘ssss’ where ‘ssss’ is the station numberCCALr MGSSsCSSTh,m,s CgstSgid Status Codes for Sirius Tuner Mcmd Command CodesMcmd Command Codes Status Codes for Sirius TunerStatus Messages Status MessagesMASOFF0 MRGSz,s,b8,b7,b6 MBALr,xMPRVr,x MGSTr,v,bb,t,s,r,z,l,pMSTPs,t MFAVr,s,fMLOTb8,b7,b6 MPRSs,n,pRSIDx,y CSTv,h,m,sCALMr,s,v,h,m RSSTx,y,zSource Unit Connections TroubleshootingPower Connections Symptom Possible Causes SectionSource Connections Zone Connection ProblemsDead Zones LED Does Not lightKeypad Lights, No Sound No Keypad Activity At AllProgramming Troubleshooting Tango Series Audio Controllers It’s Your World Take Control

DAS-T0808-SIG, DAS-T0804-SIG specifications

The AMX DAS-T0804-SIG and DAS-T0808-SIG are the forefront of advanced data distribution systems, designed to cater to the dynamic needs of commercial audio-visual installations. These models provide exceptional performance in managing and distributing various signals efficiently, ensuring seamless integration with a wide array of multimedia components.

One of the standout features of the DAS-T0804-SIG is its ability to support up to four output signals, while the DAS-T0808-SIG extends this capability to eight outputs. This scalability makes both units ideal for projects requiring flexible signal routing, whether for corporate environments, educational institutions, or entertainment venues.

Both models leverage cutting-edge digital signal processing (DSP) technologies to enhance audio quality and ensure fidelity during signal transmission. The units are equipped with advanced signal management features, including automatic gain control and equalization, which help maintain consistent audio levels and optimize playback across different environments. This ensures that users experience high-quality sound without the hassle of manual adjustments.

Connectivity options are plentiful, with support for both HDMI and analog inputs. The HDMI ports allow for seamless integration with high-definition video sources, while the analog inputs cater to older equipment, making the DAS-T0804-SIG and DAS-T0808-SIG versatile choices for mixed-system setups. The ability to handle diverse input types helps manage the challenges of modern AV environments, where devices can vary widely.

Another notable characteristic is the intuitive user interface that facilitates easy configuration and operation. The models come equipped with LED indicators for monitoring signal status, which provide real-time feedback and help troubleshoot issues swiftly. This user-centric design is particularly beneficial for installation professionals who require efficient workflows.

The DAS-T0804-SIG and DAS-T0808-SIG are also built with robust security features to protect against unauthorized access and ensure integrity in signal transmission. This is increasingly crucial in settings where sensitive information may be communicated.

In summary, the AMX DAS-T0804-SIG and DAS-T0808-SIG systems are powerful, flexible, and secure solutions for modern AV installations, characterized by their advanced signal processing, versatile connectivity, and intuitive design. Their ability to accommodate a variety of applications makes them an essential tool for any professional seeking to optimize audio-visual performance.
Top Page Image Contents