Caring For Your Range
Continued
3. Lift out the reflector bowl and trim ring. See “Cleaning tips” on page 27 for cleaning instruc- tions.
Replacing
Burn, Electrical Shock and Fire Hazard
l Make sure all surface units are OFF before replacing surface units and reflector bowls. Failure to do so can result in burns or electrical shock.
*Do not line the reflector bowls with foil. Fire or electrical shock could result.
1. Line up openings in the reflector bowl and notches in the trim ring with the surface unit receptacle.
2. Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the recep- tacle.
18