Electronic oven control, Display/clock | Whirlpool FGS395Y instruction

The electronic oven control

Cancel		lime/Tamp
button	Display	Set Knob

BAKE

ON/OFF CLOCK

Timtw	Clock	Bake	stop	Cl&l	Broil	Bake
on/off	button	lima	time	button	button	temp
button		button	button			button

Display/clock

l When you first plug in the range, the display will flash until you set a new time. If after you set the clock (page 12) the display again flashes, your electricity has been off. Reset the clock.

9 When you are not using the oven, this is an accurate clock.

l When using the oven or Timer, the display will show the time, temperature settings and what command buttons have been pushed.

l When showing the time of day, the display will show the hour and minutes.

l When using the Timer, the display will show hours, minutes and seconds in the following sequence:

-For settings from O-l minute 55 seconds, the display will increase in 5-second incre- ments and count down each second.

-For settings from 2-10 minutes, the display will increase in 1O-second increments and count down each second.

-For settings from 10-60 minutes, the display will increase in 1-minute increments and count down each second.

-For settings from 1 hour-9 hours 50 minutes, the display will increase in 5-minute increments and count down each minute.

l When using Bake Time and/or Stop Time, the display will show hours and minutes.

Command buttons

The command buttons tell the oven what to do and in what order. A few examples:

-Clock tells the oven you are going to set the clock.

-Cancel tells the oven to turn off.

Each command button (except Cancel) has its own light. The light comes on when you push the command buttons.

Timehemp set knob

Once you’ve pushed a command button to tell the oven what you want it to do, you’ll use the Time/Temp Set Knob to set a temperature or time. Turning the TimeITemp Set Knob clockwise increases the number on the display. Turning the Time/Temp Set Knob counterclockwise de- creases the number on the display.