CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
To replace:
NOTE: The nails or screws you inserted must still be in both sides of the door.
1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
2. Rest the hinge hanger so that it is flat (at the | Remove nail |
bottom of the hinge hanger on the bottom of the | or screw |
front frame slot). |
|
3. | Position the door with the hinge hanger slots | Oven door | Range |
| almost parallel to the front frame. | ||
4. | Push up and in until the hinge hanger slots |
|
|
| become fastened to the range. Lower the door |
| Hinge |
| and rotate it slightly from the front to the back |
| hanger |
| until the slots are fully fastened. The hinge | Up |
|
| hanger will be close to the bottom of the front | Hinge | |
| frame slot. |
| |
|
| hanger | |
5. | Pull door open about halfway and remove the |
| |
| flat | ||
| nails or screws. |
| |
|
| In | |
|
|
|
6.Close the door.
Front frame slot bottom
25