Error Codes Table

The electronic system continually performs a series of diagnostic tests. If some parameters are incorrect, the control unit deactivates the functions and displays an error code (Err followed by three numerical digits); all the heating elements are turned off, including the fan inside the cooking chamber. The cooling fan remains on.

Take note of the error code and contact an Authorized Service Centre, specifying the error code.

Error Code		Cause	SOLUTION
Err	001	BOILER overheat	Check that there is water in the
		The causes of this alarm are:	pitcher.
		The fill pump does not pour the water from	Turn the oven off and on again.
		the pitcher to the boiler.	If the failure repeats, take note of
		The causes may be:	If the failure repeats, take note of
		a – empty pitcher	the error code and contact an
		b – a leak in the hydraulic circuit	Authorized Service Centre,
		c – broken pump	specifying the error code.
		d – electronic failure in the power circuit
		(relay or relay control)
Err	002	Boiler protection alarm.	Take note of the error code and
		The system de-energizes the GEN. relay	contact an Authorized Service
		in advance, and thus all the loads	Centre, specifying the code.
		connected to it.	Centre, specifying the code.
		connected to it.
		- Replace the power card
Err	003	Power card overheat: threshold value	Check whether the oven is
		>=85°	embedded in the furniture
			according to the instructions in this
			handbook.
			Check whether the tangential fan is
			operating correctly.
Err	004	PT1000 cooking chamber sensor	Contact an Authorized Service
		Cause: interruption or short circuit of the	Centre, specifying the code.
		sensor or cables.
		- Replace the PT1000
Err	005	Food sensor	Contact an Authorized Service
		Cause: interruption or short circuit of the	Centre, specifying the code.
		sensor or cables.
		- Check the electrical connections.
		- Replace the food probe.
Err	006	Boiler thermocouple failure Cause: open	Contact an Authorized Service
		circuit or short to earth.	Centre, specifying the code.
		- Replace the BOILER.
Err	007	Cooking chamber steam presence	Contact an Authorized Service
		thermocouple failure Cause: open circuit	Centre, specifying the code.
		or short to earth.
		- Replace the TC1.
Err	008	Cooking chamber overheat	Contact an Authorized Service
		- Replace the power card	Centre, specifying the code.
Err	009	Failure of the ntc sensor on the power	Contact an Authorized Service
		card Cause: open circuit or short.	Centre, specifying the code.
		- Replace the power card

S4000 specifications

The Foster S4000 is a versatile and powerful piece of equipment that has garnered attention in various industries for its impressive performance and innovative features. Designed for both efficiency and ease of use, the S4000 is suitable for a wide range of applications, from industrial settings to commercial operations.

One of the standout features of the Foster S4000 is its advanced automation capabilities. The system integrates state-of-the-art technologies that allow users to streamline processes, thereby increasing productivity. It boasts a user-friendly interface that simplifies operation, enabling even those with minimal technical skills to manage complex tasks efficiently.

At the heart of the S4000 is its robust engine, which delivers exceptional power and torque. This not only enhances the machine's performance but also contributes to its durability, ensuring it can handle demanding workloads without compromising reliability. The engine is designed to operate smoothly under various conditions, making it ideal for outdoor and indoor applications alike.

The S4000 incorporates cutting-edge sensory technology that enhances precision in operation. This technology enables real-time monitoring, allowing users to make informed decisions based on data collected during its operation. This aspect is particularly beneficial in settings where accuracy is paramount, such as manufacturing and quality control environments.

Safety is a top priority with the Foster S4000. The unit comes equipped with multiple safety features, including emergency stop buttons, overload protection, and automatic shut-off mechanisms. These features not only safeguard the operator but also prolong the life of the machine by preventing damage due to mishandling or unforeseen circumstances.

Moreover, the S4000 is designed with sustainability in mind. Its energy-efficient engine reduces fuel consumption, making it an eco-friendly option without compromising performance. The materials used in its construction are also chosen for their longevity and minimal environmental impact, contributing to a reduced carbon footprint.

In conclusion, the Foster S4000 stands out as a modern solution for various industrial and commercial applications. With its combination of advanced technologies, exceptional performance, and commitment to safety and sustainability, it is a top choice for businesses looking to enhance their operational efficiency and productivity. Its blend of power, precision, and user-friendliness makes it an indispensable asset in today’s competitive market.