Foster S4000 Installation, Connection to the mains power supply, Replacement of the power cord

Page 6

INSTALLATION

Remove the appliance from the package and check that the product and power cord are NOT damaged.

Otherwise, contact the retailer before operating the appliance. Do not lift the product by the door handle.

Packaging (e.g. paper, polystyrene) may be hazardous to children (danger of suffocation). Keep packaging out of the reach of children.

The product must be installed and connected correctly to the mains power supply, following the manufacturer's instructions and only by QUALIFIED PERSONNEL.

Before performing any type of work, it must be verified that the appliance is DISCONNECTED from the mains power supply.

Connection to the mains power supply

Make sure the voltage matches that indicated on the typeplate which can be viewed by opening the oven door.

Check whether there is an omnipolar switch available on the domestic line which is compliant with current standards (3 mm minimum opening distance between contacts) and if it is able to support the load of the appliance (see the typeplate). Otherwise place a device, easily reachable, between the appliance and the electricity line with the described specifications.

CAUTION: Check whether your electrical system is equipped with an efficient earth connection according to current standards and legal provisions.

N.B. The earth connection is required by law.

The yellow/green earth cable must not be interrupted by the switch and must be 2-3 cm longer than the other cables.

Do not position the power cord near sources of heat or at temperatures more than 50°C above the room temperature.

If the appliance is lacking the power cord, the oven must be connected to the mains power supply with a cable having a minimum section of 1.5mm².

If a plug is to be used, it must be a standard plug suitable for the load and the power outlet.

Replacement of the power cord:

If the power cord needs to be replaced, use cables of the following type only: H05 RR-F, H05V2V2-F(T-90)

Wire sections 3x1.5mm2

Terminal box

The oven is equipped with a terminal box set up for operation with a single-phase 220-240V~ 50/60Hz supply voltage.

Attention: should it be necessary to replace the supply cord, connect the wire in accordance with the following colours/codes:

BLUE

- NEUTRAL (N)

BROWN

- LIVE (L)

YELLOW-GREEN

- EARTH ( )

52

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Foster spa USERS MANUAL FOR BUILT-IN OVENMultifunction steam S4000, cod. 7135 via M.S. Ottone, 18/20 42041 Brescello RE - ItalyCONTENTS INTRODUCTION OVEN DESCRIPTION WARNINGS Leave the oven door open in the supported position only Replacement of the power cord INSTALLATIONConnection to the mains power supply Terminal boxCLEANING AND MAINTENANCE OF OVEN AND ACCESSORIES Oven preparation and pre-useUsable volume cooking chamber 27 L Gross volume cooking chamber 31 L INSTRUCTIONS FOR CORRECT INSTALLATIONTECHNICAL DATA Water tray capacityOven dimensions DESCRIPTION OF THE OVEN AND ACCESSORIES DESCRIPTION OF THE CONTROL PANEL Description of the keysFIRST START-UP HOW TO TURN THE OVEN ONHOW TO TURN THE OVEN OFF Do not touch the keypad during this brief periodMin-Max and symbolCOOKING CYCLES AVAILABLE FoodHOW TO SELECT A COOKING FUNCTION USING A COOKING FUNCTION THAT INCLUDES STEAMUSING A COOKING FUNCTION THAT DOES NOT INCLUDE STEAM HOW TO USE THE ALARM FUNCTION HOW TO CHANGE THE COOKING CHAMBER TEMPERATUREHOW TO START THE COOKING Note The buzzer is automatically deactivated after 5 minutesHOW TO PROGRAM THE OVEN HOW TO SET OR CHANGE THE COOKING TIME HOW TO DISPLAY OR CHANGE THE ALARM STATUSHow to reset the alarm function HOW TO CANCEL A COOKING TIMEA clear message “OVEN TO BE TURNED ON IN .. ..” HOW TO PROGRAM THE START AND STOP OF THE OVENHOW TO CANCEL AN OVEN START/STOP PROGRAM COOKING FINISHED MODEHow to use the food probe COOKING WITH THE FOOD PROBEHOW TO CHANGE THE FOOD PROBE TEMPERATURE USING THE FOOD PROBE AS A THERMOMETERHOW TO PROGRAM THE START OF THE OVEN USING THE FOOD PROBE cooking cycle cooking chamber temperature HOW TO SAVE A COOKING CYCLESAVING A COOKING CYCLE Menu functionsHOW TO ADD STEAM IN THE HOT AIR + STEAM COOKING MODE PRESS TO ADD STEAMHOW TO MOVE AROUND INSIDE THE MENU MENU STRUCTURE FLOW-CHART BREAD/PIZZA recipe list TIMBALES recipe listMEAT recipe list FISH recipe list VEGETABLES recipe listHOW TO PERSONALIZE THE RECIPE LIST HOW TO LOAD YOUR OWN RECIPEDESSERTS recipe list HOW TO DELETE YOUR OWN RECIPE PRACTICAL COOKING SUGGESTIONSDrip pan GrillPerforated drip pan Food probeHOW TO PERSONALIZE YOUR OVEN SETTING THE CLOCKSET TIME SETTING KEYPAD LOCKHOW TO DEACTIVATE THE KEYPAD LOCK CLOCK DISPLAYEDLIGHTING KEYPAD LOCK DETAILSBUZZER WATER HARDNESSCOOKING CHAMBER START CLEANING CYCLECOOKING CHAMBER CLEANING CYCLE COMPLETE USE A CLOTH TO REMOVE DIRT BOILER DESCALINGINSTRUCTIONS for boiler descaling process Boiler washRESET SETTINGS This function is used to reset the system in case of problemsOVEN OFF MODE WHAT TO DO IN CASE OF AN ANOMALY PROBLEMSOLUTION WHAT TO DO IN CASE OF A BLACK-OUTERROR CODES TABLE 1. Unscrew turning anti-clockwise the front knurled nuts D HOW TO DISASSEMBLE THE SIDE GRILLSHOW TO REASSEMBLE THE SIDE GRILLS 2. Extract, one at a time, the side grills GHOW TO CHANGE THE OVEN LIGHT BULB HOW TO CHANGE THE COOKING CHAMBER SEALInstruction for changing the light bulb HOW TO DISASSEMBLE THE OVEN DOOR ‘Beep’ Signal HOW TO REASSEMBLE THE OVEN DOORKeypad command inactivity OVEN DETAILSINSERT THE PITCHER SYSTEM WARNINGSCHECK THAT THERE IS WATER IN THE PITCHER CONNECT FOOD PROBEDISPOSAL Packaging Oven
Related manuals
Manual 31 pages 51.51 Kb Manual 22 pages 5.85 Kb

S4000 specifications

The Foster S4000 is a versatile and powerful piece of equipment that has garnered attention in various industries for its impressive performance and innovative features. Designed for both efficiency and ease of use, the S4000 is suitable for a wide range of applications, from industrial settings to commercial operations.

One of the standout features of the Foster S4000 is its advanced automation capabilities. The system integrates state-of-the-art technologies that allow users to streamline processes, thereby increasing productivity. It boasts a user-friendly interface that simplifies operation, enabling even those with minimal technical skills to manage complex tasks efficiently.

At the heart of the S4000 is its robust engine, which delivers exceptional power and torque. This not only enhances the machine's performance but also contributes to its durability, ensuring it can handle demanding workloads without compromising reliability. The engine is designed to operate smoothly under various conditions, making it ideal for outdoor and indoor applications alike.

The S4000 incorporates cutting-edge sensory technology that enhances precision in operation. This technology enables real-time monitoring, allowing users to make informed decisions based on data collected during its operation. This aspect is particularly beneficial in settings where accuracy is paramount, such as manufacturing and quality control environments.

Safety is a top priority with the Foster S4000. The unit comes equipped with multiple safety features, including emergency stop buttons, overload protection, and automatic shut-off mechanisms. These features not only safeguard the operator but also prolong the life of the machine by preventing damage due to mishandling or unforeseen circumstances.

Moreover, the S4000 is designed with sustainability in mind. Its energy-efficient engine reduces fuel consumption, making it an eco-friendly option without compromising performance. The materials used in its construction are also chosen for their longevity and minimal environmental impact, contributing to a reduced carbon footprint.

In conclusion, the Foster S4000 stands out as a modern solution for various industrial and commercial applications. With its combination of advanced technologies, exceptional performance, and commitment to safety and sustainability, it is a top choice for businesses looking to enhance their operational efficiency and productivity. Its blend of power, precision, and user-friendliness makes it an indispensable asset in today’s competitive market.
Top Page Image Contents