Estate TGRGIWZB manual If You Need Assistance or Service, Before calling for assistance, Problem

Page 24

If You Need Assistance or Service

This section is designed to help you save the cost of a service call. Pat-t 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed description of the problem, your appliance’s complete model and serial numbers, and the purchase date. (See page 2.) This information will help us respond properly to your request.

1. Before calling for assistance . . .

Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.

PROBLEM

Nothing will operate

The oven will not operate

Burner fails to light

POSSIBLE CAUSE

The power cord is not plugged into a live circuit with proper voltage.

Range is not properly connected to gas supply.

A household fuse has blown or a circuit breaker has tripped.

Controls are not set correctly.

The Oven Temperature Control is not turned to a temperature setting.

The gas regulator valve is in the off position.

The power cord is not plugged into a live circuit with proper voltage.

A household fuse has blown or a circuit breaker has tripped.

Burner ports are clogged.

SOLUTION

Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)

Contact an authorized Whirlpool service technician to reconnect range to gas supply. (See Installation Instructions.)

Replace household fuse or reset circuit breaker.

Reset controls, if needed.

Push in and turn the Oven Temperature Control to a temperature setting.

Move the regulator valve lever to the open position. (See Installation Instructions.)

Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)

Replace household fuse or reset circuit breaker. In case of prolonged power failure, manually light burners. (See we 8.)

Clean with a straight pin. (See page 18.)

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents UseAndCare Your safety is important to us Thank you for buying an ESTATE@’ applianceImportant Safety Instructions Read and Save These InstructionsWhen using the cooktop When using the oven Care and cleaninnGrease Parts and Features Control PanelsUsing Your Range Using the surface burnersBurner heat settings ThisCase of a prolonged power failure Cookware tipsRecommended USE Positioning racks PansHome canning information FoodFor best air circulation Extra oven rack positionUsing the Minute Timer ClockClock HourBaking/roasting Adjusting the oven temperature control BroilingEnergy saving tips Oven Vent Anti-tip bracketsTo verify the anti-tip brackets are engaged Caring for Your Range Surface burner aratesThis Section Cleaning the contoured well areas Surface burners and cooktopCleaning the surface burners Removina the oven door To removeRemoving the oven bottom To replaceCleaning chart HOW to CleanPart What to USE Part Oven light To replace the oven lightIf You Need Assistance or Service ProblemSolution Before calling for assistanceAre Not What You Expected Oven Temperature If you need service If you need FSP@ Replacement partsIf you are not satisfied with how the problem was solved If you need assistancePage Gas Range Warranty Length of Warranty Whirlpool will PAY for Full ONE-YEARWarranty Whirlpool will not PAY for
Top Page Image Contents