In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed. Installing the oven so that it rests on two strips of wood is preferable. If the oven rests on a continuous, flat surface, there must be an opening of at least 1 49/64” x 22 23/64” (45×568mm).
The panels of the adjacent cabinets must be made of
In compliance with current safety standards, the electrical parts of the oven must be completely out of reach once it has been installed.
All parts, which ensure the safe operation of the appliance, must only be removed with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 wooden screws into the 4 holes located on the perimeter of the frame.
11