DCS BGB36-BQAR manual LP GAS Hook UP Type 1 or QCC1 Regulator, LP Tank Requirements

Page 9

GAS REQUIREMENTS

LP GAS HOOK UP (TYPE 1 OR QCC1 REGULATOR):

Grills orificed for use with LP gas come equipped with a high capacity hose/regulator assembly for connection to a standard 20 lb. LP cylinder (Type 1). The LP tank is not included.

Connection: 1/2" NPT male with a 3/8" Flare adapter (included). LP Hose with a quick disconnect and

fittings are included. Operating pressure: 10.0" W.C.

To connect the LP regulator/hose assembly to the tank/valve assembly, first make sure the main valve on the tank is completely closed. Although the flow of gas is stopped when the Type 1 system is disconnected as part of of its safety feature, you should always turn off the LP tank main valve (Fig.02) after each use and during transport of the tank or unit. Insert the regulator inlet into the tank valve and turn to the black coupler clockwise until the coupler tightens up. Do not overtighten the coupler. Turn the main tank valve on and turn the burner control valves on the unit to the “HI”position for about 20 seconds to allow the air in the system to purge before attempting to light the burners.

To disconnect the coupler, first make sure the main tank valve is turned off. Grasp the coupler and turn counter clockwise. The inlet will then disengage, remove the inlet from the tank valve opening if it has not already done so when it disengaged. Your local LP filling station should be equipped with the proper equipment to fill your tank.

LP TANK REQUIREMENTS:

A dented or rusty LP tank may be hazardous and should be checked by your LP supplier. Never use a cylinder with a damaged valve. Always check for leaks after every LP tank change. The LP gas cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) and designed for use with a Type 1 system only. Do not change the regulator/hose assembly from that supplied with the unit or attempt to use a Type 1 equipped regulator/hose assembly with a standard 510 POL tank/valve assembly. The cylinder must be provided with a shut-off valve terminating in an LP gas supply cylinder valve outlet specified, as applicable, for connection Type 1. If the appliance is stored indoors, the cylinder must be disconnected and removed from the appliance. Cylinders must be stored outdoors in a well-ventilated area out of the reach of children.

NOTE: When an LP unit is directly attached into an LP house system, the step down regulator MUST be used to reduce the supply pressure to a max. 14” W.C. and min. 11” W.C. to the grill regu- lator.

Threading compound must be resistant to LP gas

Type 1 Regulator

Main Valve

Type 1 Tank

Bottom of unit

Adapter 1/2 NPT to 3/8 flare fitting

Do not put threading compound on these threads

LP Regulator hose assembly 10" W.C.

*Installation must conform with local codes or with the National Fuel Gas Code ANSI Z223.1

FIG.02 LP Gas

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Professional 36/48 BGB Grill Please Retain this Manual for Future Reference Message to OUR CustomersTable of Contents Important Safety Notice Safety Practices & PrecautionsGrill Placement Safety Practices & Precautions Grill Models Total GAS Consumption of the Grill with ALL Burners on HI GAS RequirementsNatural GAS Hook UP To HOOK-UP the Fittings Supplied with the GrillLP Tank Requirements LP GAS Hook UP Type 1 or QCC1 RegulatorInsulated Jacket Locating GRILL/BUILT-IN ClearancesLocation Clearances to Combustible ConstructionGeneral Standard layout for non-combustible enclosure BUILT-IN Construction DetailsBefore Testing Leak TestingGeneral To TestInstaller Final Checklist Installer CHECKLIST/BURNER AdjustmentsGrill Burner Flame Height Side Burner Flame HeightGrill Burner Air Adjustment Burner AdjustmentsTo Adjust LOW Setting AdjustmentsUsing the Grill Radiant Asssembly InstallationGrill Replacement of Regulators and Hose Important Using the GrillGrilling Hints Using the GRILL/LIGHTING Instructions To Light the Grill BurnerMatch Lighting To Light Dual Side Burners 48BQR Models only Lighting InstructionsSide Burners Lighting Instructions Side Burners Match LightingUsing the Smoker System To Light the Smoker BurnerWood Chips ROD Light Motor Preparation Using the RotisserieRecommended Working AreaCooking on Rotisserie Manual Lighting To Light the Rotisserie BurnerCare and Cleaning Grill burner cleaning Burner Removal and CleaningSide Burners IgnitersSmoker Burner Orifice CleaningBefore Calling for Service TroubleshootingGrill won’t light when the ignition button is pushed Low heat with knob in HI positionDescription BGB36/48-BQAR Grill Body Parts ListBGB48-BQR Grill Body Parts List BGB48-BQR Grill Body Parts List BGB36-BQAR, BGB48-BQR Handle, Rotisserie Rod 18040 Screw Rotisserie AssemblySmoker Burner Assembly Grill Cart Parts List 33032-01 Wiring Diagram BGB36-BQAR Models Wiring Diagram BGB48-BQR Models Smoker Burner Electrode Wiring Diagram BGB48-BQAR ModelsHOW to Obtain Service ServiceLength of Warranty WarrantyDCS Will Pay For DCS Will Not Pay ForLitho in USA 09/2001

BGB36-BQAR specifications

The DCS BGB36-BQAR is a premium built-in gas barbecue grill that flawlessly combines functionality with sophisticated design, offering grilling enthusiasts an unparalleled cooking experience. This grill is tailored for those who are serious about outdoor cooking, providing innovative features that elevate the grilling process to a new level.

One of the standout characteristics of the DCS BGB36-BQAR is its powerful heating capabilities. Equipped with four high-performance burners that produce an impressive total of 60,000 BTUs, this grill ensures quick heat-up times and optimal temperature control. Each burner is designed to deliver consistent flame distribution, allowing for precise cooking temperatures across the grilling surface.

The grill boasts a spacious cooking area of 726 square inches, making it ideal for entertaining and preparing meals for large gatherings. The cooking surface comprises heavy-duty stainless steel grates that provide excellent heat retention and easy cleaning properties. These grates are designed to leave beautiful sear marks on meats, enhancing presentation and flavor profiles.

In addition to the main grilling surface, the DCS BGB36-BQAR features a convenient infrared rotisserie burner, perfect for slow-roasting meats to perfection. This technology ensures even heat distribution, producing juicy, flavorful dishes every time. The built-in rotisserie kit allows cooks to easily prepare whole chickens or roasts with minimal effort.

Another prominent technology incorporated in this grill is the ceramic ignition system, which ensures reliable start-up every time. This feature eliminates the frustration of dealing with traditional ignition systems and provides peace of mind while grilling. Combined with the grill's robust construction, which includes a double-lined hood for heat retention and longevity, the DCS BGB36-BQAR is built to last.

User convenience is further enhanced by the integrated grease management system, which collects drippings and minimizes flare-ups. It also features built-in LED lights that illuminate the cooking surface, allowing users to grill comfortably even in low-light conditions.

In summary, the DCS BGB36-BQAR is an exceptional grill that marries cutting-edge technology with thoughtful design elements. With its high BTU output, generous cooking space, advanced ignition system, and thoughtful features like the rotisserie burner and grease management, it caters to both novice and experienced grilling aficionados, making outdoor cooking a truly enjoyable experience.
Top Page Image Contents