DCS BGB36-BQAR manual GAS Requirements, Total GAS Consumption of the Grill with ALL Burners on HI

Page 8

GAS REQUIREMENTS

Verify the type of gas supply to be used,

 

 

either natural or LP, and make sure the

 

 

marking on the appliance rating plate

 

 

agrees with that of the supply. The rating

Bottom of unit

 

 

 

 

 

 

 

plate is located on the outside of the back

 

 

wall of

the Grill.

Never connect

an

Threading compound

Coupling

unregulated gas line to the appliance.

 

1/2 NPT

 

must be resistant to LP gas

 

 

 

 

 

 

Close

An installer supplied gas shut-off valve

 

NIpple

 

Regulator

 

 

 

 

 

 

must be installed in an easily accessible

1/2 x 5" NPT

4.0" W.C.

 

location. All installer supplied parts must

Close

 

NIpple

Adapter 1/2 NPT

conform to local codes, or in the absence of

 

Installer supplied shut-off

to 3/8 flare fitting

local codes, with the National Electrical

 

valve must be easily

Do not put threading

Code,

ANSI/NFPA

70-1990,

and

the

accessible*

 

compound on these

National Fuel Gas Code, ANSI Z223.1.

 

 

threads

 

 

 

All pipe sealants must be an approved type

*Installation must conform with

 

local codes or with the National

 

and resistant to the actions of LP gases.

Fuel Gas Code ANSI Z223.1

 

 

 

Never use pipe sealant on flare fittings. All

 

 

gas connections should be made by a

FIG.01 Natural Gas

 

qualified technician

and in

accordance

 

 

with local codes and ordinances. In the absence of local codes, the installation must comply with the national fuel gas code ANSI Z223.1. Gas conversion kits are available from the factory. When ordering gas conversion kits have the model number, and the type of gas (natural or LP) from your grill.

TOTAL GAS CONSUMPTION OF THE GRILL WITH ALL BURNERS ON HI:

BGB48-BQR - 122,500 Btu/hr BGB48-BQAR - 121,500 Btu/hr BGB36-BQAR - 92,500 Btu/hr

The appliance and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG (3.5 kPa.) The appliance must be isolated from the gas supply piping system by closing its individual manual shut- off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG (3.5 kPa.). The installation of this appliance must conform with local codes or, in the absence of local codes, with the national fuel gas code, ANSI Z223.1. Installation in Canada must be in accordance with the Standard Can1-b149.1 and/or .2 (installation code for gas burning appliances and equipment) and local codes.

NATURAL GAS HOOK UP:

Connection: 1/2" NPT male with 3/8" flare adapter. Operating pressure: 4.0" W.C.

Supply pressure: 5" to 14" water column. If in excess of 14" W.C. a step down regulator is required. Check with your local gas utility company or with local codes for instructions on installing gas supply lines. Be sure to check on type and size of run, and how deep to bury the line. If the gas line is too small, the grill will not function properly. Any joint sealant used must be an approved type and be resistive to the actions of LP gases.

TO HOOK-UP THE FITTINGS SUPPLIED WITH THE GRILL:

Assemble as shown (Fig.01). Use threading compound on male threads only. Do not use threading compound on the male end of the 1/2 NPT to 3/8 flare adapter. Use a second pipe wrench to hold the grill inlet pipe to avoid shifting any internal gas lines of the grill. Ensure that the regulator arrow points in the direction of gas flow towards the unit, away from the supply. Do not forget to place the installer supplied gas valve in an accessible location.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Professional 36/48 BGB Grill Message to OUR Customers Please Retain this Manual for Future ReferenceTable of Contents Safety Practices & Precautions Important Safety NoticeGrill Placement Safety Practices & Precautions Grill Models GAS Requirements Total GAS Consumption of the Grill with ALL Burners on HINatural GAS Hook UP To HOOK-UP the Fittings Supplied with the GrillLP GAS Hook UP Type 1 or QCC1 Regulator LP Tank RequirementsLocating GRILL/BUILT-IN Clearances Insulated JacketLocation Clearances to Combustible ConstructionGeneral BUILT-IN Construction Details Standard layout for non-combustible enclosureLeak Testing Before TestingGeneral To TestInstaller CHECKLIST/BURNER Adjustments Installer Final ChecklistGrill Burner Flame Height Side Burner Flame HeightBurner Adjustments Grill Burner Air AdjustmentTo Adjust LOW Setting AdjustmentsGrill Using the GrillRadiant Asssembly Installation Grilling Hints Replacement of Regulators and HoseImportant Using the Grill Match Lighting Using the GRILL/LIGHTING InstructionsTo Light the Grill Burner Lighting Instructions To Light Dual Side Burners 48BQR Models onlySide Burners Lighting Instructions Side Burners Match LightingWood Chips Using the Smoker SystemTo Light the Smoker Burner ROD Light Motor Using the Rotisserie PreparationRecommended Working AreaCooking on Rotisserie To Light the Rotisserie Burner Manual LightingCare and Cleaning Burner Removal and Cleaning Grill burner cleaningSide Burners IgnitersOrifice Cleaning Smoker BurnerTroubleshooting Before Calling for ServiceGrill won’t light when the ignition button is pushed Low heat with knob in HI positionBGB36/48-BQAR Grill Body Parts List DescriptionBGB48-BQR Grill Body Parts List BGB48-BQR Grill Body Parts List BGB36-BQAR, BGB48-BQR Rotisserie Assembly Handle, Rotisserie Rod 18040 ScrewSmoker Burner Assembly Grill Cart Parts List 33032-01 Wiring Diagram BGB36-BQAR Models Wiring Diagram BGB48-BQR Models Wiring Diagram BGB48-BQAR Models Smoker Burner ElectrodeService HOW to Obtain ServiceWarranty Length of WarrantyDCS Will Pay For DCS Will Not Pay ForLitho in USA 09/2001

BGB36-BQAR specifications

The DCS BGB36-BQAR is a premium built-in gas barbecue grill that flawlessly combines functionality with sophisticated design, offering grilling enthusiasts an unparalleled cooking experience. This grill is tailored for those who are serious about outdoor cooking, providing innovative features that elevate the grilling process to a new level.

One of the standout characteristics of the DCS BGB36-BQAR is its powerful heating capabilities. Equipped with four high-performance burners that produce an impressive total of 60,000 BTUs, this grill ensures quick heat-up times and optimal temperature control. Each burner is designed to deliver consistent flame distribution, allowing for precise cooking temperatures across the grilling surface.

The grill boasts a spacious cooking area of 726 square inches, making it ideal for entertaining and preparing meals for large gatherings. The cooking surface comprises heavy-duty stainless steel grates that provide excellent heat retention and easy cleaning properties. These grates are designed to leave beautiful sear marks on meats, enhancing presentation and flavor profiles.

In addition to the main grilling surface, the DCS BGB36-BQAR features a convenient infrared rotisserie burner, perfect for slow-roasting meats to perfection. This technology ensures even heat distribution, producing juicy, flavorful dishes every time. The built-in rotisserie kit allows cooks to easily prepare whole chickens or roasts with minimal effort.

Another prominent technology incorporated in this grill is the ceramic ignition system, which ensures reliable start-up every time. This feature eliminates the frustration of dealing with traditional ignition systems and provides peace of mind while grilling. Combined with the grill's robust construction, which includes a double-lined hood for heat retention and longevity, the DCS BGB36-BQAR is built to last.

User convenience is further enhanced by the integrated grease management system, which collects drippings and minimizes flare-ups. It also features built-in LED lights that illuminate the cooking surface, allowing users to grill comfortably even in low-light conditions.

In summary, the DCS BGB36-BQAR is an exceptional grill that marries cutting-edge technology with thoughtful design elements. With its high BTU output, generous cooking space, advanced ignition system, and thoughtful features like the rotisserie burner and grease management, it caters to both novice and experienced grilling aficionados, making outdoor cooking a truly enjoyable experience.
Top Page Image Contents