EdgeStar IB450SS owner manual Descriptions of LEDs and buttons

Page 22

Descriptions of LEDs and buttons:

Descriptions of LEDs and buttons:

1. Ice Full (Red) LED: Ice Full indicator light.

When this LED is lit, the ice storage bin is full of ice or there is something obstructing the ice-full probe. The unit will stop working. When ice cubes are taken out of the ice storage bin, clearing the ice-full probe, the red LED will keep flashing for 3 minutes.

Then the unit will restart and return to the ice making mode.

2. Ice Making (Green) LED: Ice Making indicator light.

When this LED is lit, the unit is working in the Ice Making mode controlled by a temperature probe on the evaporator. When the green LED is flashing, the unit is working in the Ice Making mode controlled by a fixed timer.

3. Ice Harvest (Yellow) LED: Ice Harvest indicator light.

When this LED is lit, the unit is working in the Ice Harvest mode controlled by the ice-full probe.

When the green and yellow LEDs are lit, the unit is working in the cold preservation stage.

4.Mode button: Mainly for service. When this button is pressed, unit can change from Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can judge the mode from the status of the green and yellow LEDs.

5.Ice size adjust: Turn the screw clockwise, and the size of individual ice cubes will

be larger in the next cycle; the cycle time will be longer. Turn the knob counterclockwise,

22

Image 22

Contents use, and maintenance IB450SS Clear Ice MakerUser’s Manual Installation only by a licensed plumberClear Ice Maker Be sure to stand the ice maker upright for at least 24 hoursFor Your Records TABLE OF CONTENTS Page ICE MAKER SAFETY…………………………………………………………………Your safety and the safety of others are very important ICE MAKER SAFETYIMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS Ice cube dimensions Power consumptionUnit weight Extension CordCOMPONENT LOCATIONS Note on ice storageRemove tape and glue from your icemaker before using ICE MAKER INSTALLATIONExcessive Weight Hazard Unpackingz This icemaker should be installed by a licensed plumber only Cleaning before useLocation Requirements Never remove the grounding prong from the plug. Never use an adapter Electrical RequirementsElectrical Shock Hazard Plug into a grounded 3-prong outlet Never use an extension cordRecommended grounding method IMPORTANT Before you begin, unplug the ice maker or disconnect powerReversing the Door Swing Leveling the Ice MakerTo remove door from hinges Water Supply ConnectionsTo replace door on hinges Free-standing installation Installation TypesConnecting the water line DrainOPERATION Recessed installationBuilt-in installation Final Check List before OperationOperating Method Never turn the water supply tap off when the ice maker is workingNever touch the evaporator when the machine is running How the machine Makes IceHow the machine uses the water Normal SoundsWhat should be kept clean CLEANING AND MAINTENANCEDo not touch the power plug when your hands are wet Preparing the Icemaker for Long StorageExterior Cleaning Interior CleaningWater Distribution Tube cleaning Condenser CleaningIce-making system Cleaning Control Panel rear of unit Descriptions of LEDs and buttons Major Functions TROUBLESHOOTINGBefore Calling for Service Do not let water contact the control boxPossible Cause ProblemProbable Correction Plug the ice maker in. Replace fuse WHAT IS NOT COVERED LIMITED WARRANTYWHAT IS COVERED DESCRIPTION OF WARRANTY SERVICEPage EdgeStar Products Box Austin, TX Toll Free