EdgeStar IB450SS Ice Maker Safety, Your safety and the safety of others are very important

Page 5
ICE MAKER SAFETY

ICE MAKER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the words "DANGER" , "WARNING" OR "CAUTION".

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

CAUTION means that failure to heed this safety statement may result in minor or moderate personal injury, property or equipment damage.

All safety messages will alert you what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions:

·

Disconnect power before cleaning.

·Disconnect power before servicing.

·

Replace all panels before operating.

·

Do not use an adapter.

·

Do not use an extension cord.

·

Use two or more people to move/install the ice maker.

5

Image 5
Contents IB450SS Clear Ice Maker use, and maintenanceClear Ice Maker Installation only by a licensed plumberUser’s Manual Be sure to stand the ice maker upright for at least 24 hoursFor Your Records Page ICE MAKER SAFETY………………………………………………………………… TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS ICE MAKER SAFETYYour safety and the safety of others are very important IMPORTANT SAFEGUARDS Unit weight Power consumptionIce cube dimensions Extension CordNote on ice storage COMPONENT LOCATIONSExcessive Weight Hazard ICE MAKER INSTALLATIONRemove tape and glue from your icemaker before using UnpackingLocation Requirements Cleaning before usez This icemaker should be installed by a licensed plumber only Electrical Shock Hazard Plug into a grounded 3-prong outlet Electrical RequirementsNever remove the grounding prong from the plug. Never use an adapter Never use an extension cordReversing the Door Swing IMPORTANT Before you begin, unplug the ice maker or disconnect powerRecommended grounding method Leveling the Ice MakerTo replace door on hinges Water Supply ConnectionsTo remove door from hinges Connecting the water line Installation TypesFree-standing installation DrainBuilt-in installation Recessed installationOPERATION Final Check List before OperationNever touch the evaporator when the machine is running Never turn the water supply tap off when the ice maker is workingOperating Method How the machine Makes IceNormal Sounds How the machine uses the waterDo not touch the power plug when your hands are wet CLEANING AND MAINTENANCEWhat should be kept clean Preparing the Icemaker for Long StorageInterior Cleaning Exterior CleaningIce-making system Cleaning Condenser CleaningWater Distribution Tube cleaning Control Panel rear of unit Descriptions of LEDs and buttons Before Calling for Service TROUBLESHOOTINGMajor Functions Do not let water contact the control boxProbable Correction Plug the ice maker in. Replace fuse ProblemPossible Cause WHAT IS COVERED LIMITED WARRANTYWHAT IS NOT COVERED DESCRIPTION OF WARRANTY SERVICEPage EdgeStar Products Box Austin, TX Toll Free