Creda R010E Know Your Timer, Clockface, Symbols, Timer Function Buttons, Auto Cooking Programme

Page 10

Know Your Timer

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using you cooker.

PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00

HOURS AND 06.00 HOURS TO PREVENT GLARE.

However, should you operate the timer during these hours the display will return to normal brightness for a few seconds and then dim again.

SYMBOLS

will light up when you select a Minute Minder Period and will remain lit for the period set. At the end of the Minute Minder Period, the timer will emit an audible tone for 2 minutes, the symbol will start to flash and will continue to flash until the Minute Minder function is cancelled.

This “Cookpot” symbol will light up either:–

–When you press the Cook Period Button and set a length of time for an Auto Cooking Programme. (It will go out again a few seconds after you release the timer buttons).

–During the actual Cook Period.

“AUTO” will light up:–

–When the timer is first turned on it will flash. (It will go out when a time of day is set.

–When an Auto Cooking Programme has been set.

The “Auto” symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the “Auto” symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button twice – The “Auto” symbol will go out).

Note: If at any time the display shows a ‘KEY’ symbol, it is likely that the timer has been set incorrectly. OVEN COOKING IS NOT POSSIBLE. The ‘KEY’ symbol can be deleted and the cooker returned to manual operation by:

-Simultaneously pressing the Minute Minder and the Cook Period buttons for a period of approximately 8 seconds.

-Releasing the buttons and pressing the ‘+’ button.

TIMER FUNCTION BUTTONS

Minute Minder Here you can set a time period of up to 23 hours 59 minutes, that will count down.

ButtonWhen it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme.

(e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven controls(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Manual Button Needs to be pressed to cancel an Auto Cooking programme and return the ovens(s) to Manual operation.

“+” and “–” Buttons Used to adjust the various timer function settings.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents E010E / R010E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents Introduction Disposal of your productSafety Advice Safety InformationAlways Safety Information Never Features Controls Control markingsOven Timer Operation Timer Function Buttons Know Your TimerSymbols ClockfaceSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes Electronic Clock and Automatic Oven Timer Operation Other Notes on Timer Operation Solarplus Grill Grill Pan Food Grid and Anti-Splash Tray Grill Pan and HandleStep Grilling Procedure Door Position for GrillingGrill Chart FoodEasy Glide Shelf Using the Oven for Fan CookingTemperature and time Oven shelf positioning for fan ovenFan oven operation Using the Oven for other Functions Conventional Fan Temperature Conversion ChartOven Oven Temperature Chart Meat If Using Aluminium FoilOven Temperature Chart Baking Baking Fan Oven CookingGrill Cooking Results Not SatisfactoryBaking General How Credaclean works Care and CleaningCredaclean Oven Liners E010E CleaningMeat b Grill/Meat Pan & Oven Shelves Cleaning the OvenBase of Main Oven Solarplus GrillHOW to Clean the Lamp Lens Replacement of the Oven LampControl Panel / Trims / Inner Door Panel & Glass Remove the door inner glass as follows Cleaning the DoorsRefit the door inner glass as follows Installation Instructions GeneralElectrical Installation Oven Unit Housing CabinetsMains Supply List of Loose Items Final InstallationConduit Box to Mains Terminal Block All cases adhere to routing details see fig560mm 550mm Problem Check Something Wrong?Key Contacts

E010E, R010E specifications

The Creda R010E and E010E are advanced electric heating solutions designed to provide efficient warmth and convenience for homes and commercial spaces. These units stand out due to their modern design, user-friendly features, and energy-saving technologies, making them ideal choices for individuals looking to optimize their indoor climate.

One of the main features of the Creda R010E and E010E is the advanced heating element, which ensures rapid warmth while maintaining low energy consumption. This efficiency is largely due to the incorporation of ceramic technology, which allows the units to store heat and release it gradually even after they have been turned off. This feature not only enhances comfort but also reduces energy bills, making them economically viable choices over traditional heating methods.

Both models are equipped with a precise electronic thermostat that ensures consistent and accurate temperature control. Users can easily set their desired comfort levels, and the heating units will intelligently adjust their output to maintain those temperatures. This sophisticated temperature management is complemented by programmable timers, enabling users to schedule heating times according to their needs, ensuring warmth is available when needed while avoiding unnecessary energy use.

The design of the Creda R010E and E010E reflects modern aesthetics, featuring sleek lines and a compact profile that allows for flexible placement in various settings. The lightweight construction means they can be easily mounted on walls, freeing up floor space while integrating seamlessly into any room’s décor.

Safety is also a critical consideration in the design of these units. Both models come with built-in overheat protection, ensuring that the heaters automatically switch off if they reach unsafe temperatures. Additionally, the sturdy build quality and high-grade materials enhance their durability, ensuring reliable performance over years of use.

Finally, the Creda R010E and E010E are also easy to maintain, with features designed to minimize dust and dirt buildup. Users can easily clean the external surfaces, ensuring optimal hygiene and a healthy living environment. With these technologies and characteristics, the Creda R010E and E010E represent some of the leading options for electric heating solutions in today's market, combining efficiency, safety, and modern aesthetics.
Top Page Image Contents