Creda R010E, E010E manual Introduction, Disposal of your product

Page 4

Introduction

Your new appliance is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet.

To help make best use of your cooking equipment, please read this booklet carefully.

The cooker is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.

When the cooker is first used an odour may be emitted, this will cease after a period of use

When first using the cooker ensure that the room is well ventilated (e.g. open a window or use an extractor fan) and that persons who may be sensitive to the odour avoid any fumes.

It is suggested that any pets be removed from the room until the smell has ceased. This odour is due to temporary finish on oven liners and elements and also any moisture absorbed by the insulation.

*The guarantee is subject to the provisions that the appliance:

(a)Has been used solely in accordance with the Users Instruction Book.

(b)Has been properly connected to a suitable supply voltage as stated on the rating plate attached to this equipment.

(c)Has not been subjected to misuse or accident or been modified or repaired by any person other than the authorised employee or agent.

(d)Has been correctly installed.

Disposal of your product

To minimise the risk of injury to children please dispose of your product carefully and safely. Remove all doors and lids. Remove the mains cable (where fitted) by cutting off flush with the appliance and always ensure that no plug is left in a condition where it could be connected to the electricity supply.

To help the environment, Local Authority instructions should be followed for the disposal of you product.

This appliance conforms to the following EEC Directives:

Electromagnetic Compatibility

Low Voltage Equipment

89/336/EEC

73/23/EEC

92/31/EEC

93/68/EEC

93/68/EEC

 

4

Image 4
Contents E010E / R010E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents Introduction Disposal of your productSafety Advice Safety InformationAlways Safety Information Never Features Controls Control markingsOven Timer Operation Know Your Timer SymbolsTimer Function Buttons ClockfaceSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes Electronic Clock and Automatic Oven Timer Operation Other Notes on Timer Operation Solarplus Grill Grill Pan Food Grid and Anti-Splash Tray Grill Pan and HandleStep Grilling Procedure Door Position for GrillingGrill Chart FoodUsing the Oven for Fan Cooking Temperature and timeEasy Glide Shelf Oven shelf positioning for fan ovenFan oven operation Using the Oven for other Functions Conventional Fan Temperature Conversion ChartOven Oven Temperature Chart Meat If Using Aluminium FoilOven Temperature Chart Baking Baking Fan Oven CookingGrill Cooking Results Not SatisfactoryBaking General Care and Cleaning Credaclean Oven Liners E010EHow Credaclean works CleaningCleaning the Oven Base of Main OvenMeat b Grill/Meat Pan & Oven Shelves Solarplus GrillHOW to Clean the Lamp Lens Replacement of the Oven LampControl Panel / Trims / Inner Door Panel & Glass Remove the door inner glass as follows Cleaning the DoorsRefit the door inner glass as follows Installation Instructions GeneralElectrical Installation Oven Unit Housing CabinetsMains Supply Final Installation Conduit Box to Mains Terminal BlockList of Loose Items All cases adhere to routing details see fig560mm 550mm Problem Check Something Wrong?Key Contacts

E010E, R010E specifications

The Creda R010E and E010E are advanced electric heating solutions designed to provide efficient warmth and convenience for homes and commercial spaces. These units stand out due to their modern design, user-friendly features, and energy-saving technologies, making them ideal choices for individuals looking to optimize their indoor climate.

One of the main features of the Creda R010E and E010E is the advanced heating element, which ensures rapid warmth while maintaining low energy consumption. This efficiency is largely due to the incorporation of ceramic technology, which allows the units to store heat and release it gradually even after they have been turned off. This feature not only enhances comfort but also reduces energy bills, making them economically viable choices over traditional heating methods.

Both models are equipped with a precise electronic thermostat that ensures consistent and accurate temperature control. Users can easily set their desired comfort levels, and the heating units will intelligently adjust their output to maintain those temperatures. This sophisticated temperature management is complemented by programmable timers, enabling users to schedule heating times according to their needs, ensuring warmth is available when needed while avoiding unnecessary energy use.

The design of the Creda R010E and E010E reflects modern aesthetics, featuring sleek lines and a compact profile that allows for flexible placement in various settings. The lightweight construction means they can be easily mounted on walls, freeing up floor space while integrating seamlessly into any room’s décor.

Safety is also a critical consideration in the design of these units. Both models come with built-in overheat protection, ensuring that the heaters automatically switch off if they reach unsafe temperatures. Additionally, the sturdy build quality and high-grade materials enhance their durability, ensuring reliable performance over years of use.

Finally, the Creda R010E and E010E are also easy to maintain, with features designed to minimize dust and dirt buildup. Users can easily clean the external surfaces, ensuring optimal hygiene and a healthy living environment. With these technologies and characteristics, the Creda R010E and E010E represent some of the leading options for electric heating solutions in today's market, combining efficiency, safety, and modern aesthetics.