Creda E010E, R010E manual Something Wrong?, Problem Check

Problem

Check

Nothing works.

(a) Check

If you find :-

Display is blank.

Then it is likely that there is no electricity supply to your oven.

Check: (i) That the main cooker wall switch is turned on.

(ii) Check other appliances to see if you have a power cut.

(iii) Check the main circuit breaker for the property.

(iv) With oven selected, the oven light does not illuminate.

Display shows 0.00 AUTO.

The power supply to your oven has possibly been interrupted, but has

now come back on again. Reset the timer to the correct time of day

and "Manual" operation using instructions given in the timer section

of the book.

Fan oven does not work but the

Check to ensure that the timer is in Manual Mode:

grill works.

See timer section for instructions on how to return timer to

"Manual".

Fan Oven and Grill do not work.

Operating the cooker under the following conditions may cause a

safety device to operate.

(a) Grilling with the door closed - always grill with the door open to

the correct position - see grilling.

(b) Grilling for an excessively long period at maximum setting -

see grilling guide.

(c) Grilling with inadequate ventilation in the cabinet - see

installation instructions.

Grill does not work.

Check that you have selected :- "Grill" function on the "Fan oven/Grill

Select" knob (A) and a Grill setting on the Grill Knob (B) - see grilling

page.

Grill keeps turning on and off.

When the Grill control (B) is operating at less than "6", the grill will

cycle on and off, this is normal and is not a fault.

Can not set an “Auto Cook”

Remember: "Cook Period" is the actual length of time for which, the

programme

timer will switch the oven on as part of an "Auto Cooking"

programme.

Draught from beneath control

A gentle flow of air will be blown from beneath the control panel

panel.

when the appliance is used. If the appliance is still warm, this cooling

fan may run on, or restart itself after all of the controls have been

turned off.

The fan will stop once the appliance has been cooled. This is normal

and not a fault.

Timer buzzer/bleeper operates

Buzzer/Bleeper should stop automatically after a short time.

continually

If not, press minute minder button to silence.