Creda E010E, R010E manual Cleaning the Doors, Remove the door inner glass as follows

Page 29

Care and Cleaning

Take particular care not to damage the inner surface of the door inner glass that is coated with a heat reflective layer. Do not use scouring pads, or abrasive powder, which will scratch the glass. Ensure that the glass panel is not subjected to any sharp mechanical blows.

Stubborn stains can be removed by using a fine steel wool pad. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it from the door. After cleaning, rinse and dry with a soft cloth.

CLEANING THE DOORS

SIDE OPENING DOORS

Cleaning the door glass is the same as the drop down doors, except take care to support the weight of the inner glass when removing and refitting.

DROP DOWN DOORS

Remove the door inner glass as follows.

1.Open the door fully and unscrew the two screws securing the glass panel so that the securing brackets can be turned. There is no need to remove the screws completely.

2.Turn the brackets so that the glass can be removed and cleaned at the sink (Fig. 1.)

Fig. 1.

3.The inside of the outer door glass can now be cleaned while still fitted to the cooker.

Glass

NEVER OPERATE THE COOKER WITHOUT THE INNER DOOR GLASS IN POSITION.

Refit the door inner glass as follows.

1.NOTE: The inner door glass has a special reflective coating on one side. Replace the door

inner glass so that the statement: “IMPORTANT THIS FACE TOWARDS THE OVEN” can be read from the inner side of the door.

2.Turn the two securing brackets back to their original position to retain the glass and tighten the screws. (Fig. 2.)

Fig. 2.

Glass

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents E010E / R010E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents Disposal of your product IntroductionAlways Safety InformationSafety Advice Safety Information Never Features Control markings ControlsOven Timer Operation Symbols Know Your TimerTimer Function Buttons ClockfaceSetting the Minute Minder Setting the Time of DAYAuto Cooking Programmes Electronic Clock and Automatic Oven Timer Operation Other Notes on Timer Operation Solarplus Grill Step Grill Pan and HandleGrill Pan Food Grid and Anti-Splash Tray Door Position for Grilling Grilling ProcedureFood Grill ChartTemperature and time Using the Oven for Fan CookingEasy Glide Shelf Oven shelf positioning for fan ovenFan oven operation Using the Oven for other Functions Oven Temperature Conversion ChartConventional Fan If Using Aluminium Foil Oven Temperature Chart MeatBaking Fan Oven Cooking Oven Temperature Chart BakingBaking General Cooking Results Not SatisfactoryGrill Credaclean Oven Liners E010E Care and CleaningHow Credaclean works CleaningBase of Main Oven Cleaning the OvenMeat b Grill/Meat Pan & Oven Shelves Solarplus GrillControl Panel / Trims / Inner Door Panel & Glass Replacement of the Oven LampHOW to Clean the Lamp Lens Refit the door inner glass as follows Cleaning the DoorsRemove the door inner glass as follows General Installation InstructionsMains Supply Oven Unit Housing CabinetsElectrical Installation Conduit Box to Mains Terminal Block Final InstallationList of Loose Items All cases adhere to routing details see fig560mm 550mm Something Wrong? Problem CheckKey Contacts

E010E, R010E specifications

The Creda R010E and E010E are advanced electric heating solutions designed to provide efficient warmth and convenience for homes and commercial spaces. These units stand out due to their modern design, user-friendly features, and energy-saving technologies, making them ideal choices for individuals looking to optimize their indoor climate.

One of the main features of the Creda R010E and E010E is the advanced heating element, which ensures rapid warmth while maintaining low energy consumption. This efficiency is largely due to the incorporation of ceramic technology, which allows the units to store heat and release it gradually even after they have been turned off. This feature not only enhances comfort but also reduces energy bills, making them economically viable choices over traditional heating methods.

Both models are equipped with a precise electronic thermostat that ensures consistent and accurate temperature control. Users can easily set their desired comfort levels, and the heating units will intelligently adjust their output to maintain those temperatures. This sophisticated temperature management is complemented by programmable timers, enabling users to schedule heating times according to their needs, ensuring warmth is available when needed while avoiding unnecessary energy use.

The design of the Creda R010E and E010E reflects modern aesthetics, featuring sleek lines and a compact profile that allows for flexible placement in various settings. The lightweight construction means they can be easily mounted on walls, freeing up floor space while integrating seamlessly into any room’s décor.

Safety is also a critical consideration in the design of these units. Both models come with built-in overheat protection, ensuring that the heaters automatically switch off if they reach unsafe temperatures. Additionally, the sturdy build quality and high-grade materials enhance their durability, ensuring reliable performance over years of use.

Finally, the Creda R010E and E010E are also easy to maintain, with features designed to minimize dust and dirt buildup. Users can easily clean the external surfaces, ensuring optimal hygiene and a healthy living environment. With these technologies and characteristics, the Creda R010E and E010E represent some of the leading options for electric heating solutions in today's market, combining efficiency, safety, and modern aesthetics.
Top Page Image Contents