Creda R010E, E010E manual Installation Instructions, General

Page 30

Installation Instructions

Important

This equipment is designed specifically for domestic purposes and Creda Limited cannot accept responsibility if used in any other type of installation.

All Creda oven units are suitable for installation under Creda hob units.

This appliance must not be installed over any appliance that generates heat.

For your own safety, we recommend that your appliance is installed by a competent person – such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest Edition of the IEE Regulations.

1. General

WARNING: THIS APPLIANCE MUST BE EARTHED.

(a)The oven unit is designed for mounting at a safe level into an oven housing which must be secured to the backing wall, or alternatively, in the case of the single oven unit, under a worktop with or without a hob unit above.

(b)In an oven/hob arrangement where it is proposed to install the oven directly below the hob. It is advisable that only slimline hobs are used which have the following maximum depths.

Kitchen Worktop thickness

Maximum hob depth

(from worktop surface vertically down)

 

 

 

30mm

55mm

 

 

40mm

65mm

 

 

40mm +

Worktop thickness + 25mm

 

 

It is most important that the hob installation instructions are strictly observed.

30

Image 30
Contents E010E / R010E Installation & User Instructions Creda Answer Centre 08701 54 64 Creda Answer Centre 08701 54 64Contents Introduction Disposal of your productSafety Information Safety AdviceAlways Safety Information Never Features Controls Control markingsOven Timer Operation Timer Function Buttons Know Your TimerSymbols ClockfaceSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes Electronic Clock and Automatic Oven Timer Operation Other Notes on Timer Operation Solarplus Grill Grill Pan and Handle Grill Pan Food Grid and Anti-Splash TrayStep Grilling Procedure Door Position for GrillingGrill Chart FoodEasy Glide Shelf Using the Oven for Fan CookingTemperature and time Oven shelf positioning for fan ovenFan oven operation Using the Oven for other Functions Temperature Conversion Chart Conventional FanOven Oven Temperature Chart Meat If Using Aluminium FoilOven Temperature Chart Baking Baking Fan Oven CookingCooking Results Not Satisfactory GrillBaking General How Credaclean works Care and CleaningCredaclean Oven Liners E010E CleaningMeat b Grill/Meat Pan & Oven Shelves Cleaning the OvenBase of Main Oven Solarplus GrillReplacement of the Oven Lamp HOW to Clean the Lamp LensControl Panel / Trims / Inner Door Panel & Glass Cleaning the Doors Remove the door inner glass as followsRefit the door inner glass as follows Installation Instructions GeneralOven Unit Housing Cabinets Electrical InstallationMains Supply List of Loose Items Final InstallationConduit Box to Mains Terminal Block All cases adhere to routing details see fig560mm 550mm Problem Check Something Wrong?Key Contacts

E010E, R010E specifications

The Creda R010E and E010E are advanced electric heating solutions designed to provide efficient warmth and convenience for homes and commercial spaces. These units stand out due to their modern design, user-friendly features, and energy-saving technologies, making them ideal choices for individuals looking to optimize their indoor climate.

One of the main features of the Creda R010E and E010E is the advanced heating element, which ensures rapid warmth while maintaining low energy consumption. This efficiency is largely due to the incorporation of ceramic technology, which allows the units to store heat and release it gradually even after they have been turned off. This feature not only enhances comfort but also reduces energy bills, making them economically viable choices over traditional heating methods.

Both models are equipped with a precise electronic thermostat that ensures consistent and accurate temperature control. Users can easily set their desired comfort levels, and the heating units will intelligently adjust their output to maintain those temperatures. This sophisticated temperature management is complemented by programmable timers, enabling users to schedule heating times according to their needs, ensuring warmth is available when needed while avoiding unnecessary energy use.

The design of the Creda R010E and E010E reflects modern aesthetics, featuring sleek lines and a compact profile that allows for flexible placement in various settings. The lightweight construction means they can be easily mounted on walls, freeing up floor space while integrating seamlessly into any room’s décor.

Safety is also a critical consideration in the design of these units. Both models come with built-in overheat protection, ensuring that the heaters automatically switch off if they reach unsafe temperatures. Additionally, the sturdy build quality and high-grade materials enhance their durability, ensuring reliable performance over years of use.

Finally, the Creda R010E and E010E are also easy to maintain, with features designed to minimize dust and dirt buildup. Users can easily clean the external surfaces, ensuring optimal hygiene and a healthy living environment. With these technologies and characteristics, the Creda R010E and E010E represent some of the leading options for electric heating solutions in today's market, combining efficiency, safety, and modern aesthetics.