Continental Refrigerator Refrigerators and Freezers START-UP Procedure Electrical Connections

Page 12

cleaning may result in a streaking or staining of the metal.

Complete cleaning procedures and precautions are listed in the "periodic cleaning procedure" under the maintenance section.

START-UP PROCEDURE

ELECTRICAL CONNECTIONS

To insure proper operation, your new model must be connected to an individual circuit that can supply the full voltage as stated on the cabinet serial data plate. For correct voltage, power draw, and wire accommodations, check the data on the serial data plate located on the inner right wall of your new model. Verify that this information exactly matches the electrical characteristics at the installation location. An electrical wiring diagram, located on the upper cabinet end panel next to the electrical console box, should also be consulted during connection.

Important Note: The condensing unit supplied with all self-contained models is designed to operate with a voltage fluctuation of + 10 % of the voltage indicated on the cabinet serial data plate. Full voltage of the correct service, on an individual line not affected by the operation of other electrical appliances, must be available to the condensing unit at all times. Burnout of the compressor due to exceeding the high or low voltage limits is easily detected and will automatically void the factory warranty.

115 VOLT, 60 HZ, 1 PHASE CONNECTION

All 115 volt models are provided with a U.L. approved power cord and polarized plug which is factory installed.

Warning: Any alterations to this cord and plug could cause an electrical hazard and will void the factory warranty.

To insure proper operation, this equipment must be plugged into a NEMA 5-15R compatible, grounded receptacle that can supply the full voltage as stated on the serial data plate.

208-230 VOLT, 60 HZ, 1 PHASE CONNECTION

All 208-230 volt models are to be permanently connected and are provided with four (4) field wiring leads which exit the electrical console box located in the machine compartment behind the front grill. The cabinet circuitry is 115 volts and

- 9 -

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Reach-In Refrigerators and Freezers Operators Manual Table of Contents Troubleshooting and Servicing Guide Wiring Diagrams Receiving Your NEW Model General Information and Important Operating FactsInstallation and Location Clearances Uncrating Your NEW ModelVentilation Floor Loads Installing Legs and Leveling REACH-IN Models Mounting ROLL-IN Models in Place and LevelingInstalling Casters and Leveling REACH-IN Models Installing Condensate Evaporator Removal of Doors and Door Adjustment Require realignment, proceed as followsInitial Cleaning Procedure Removal of GrillSTART-UP Procedure Electrical Connections VOLT, 60 HZ, 1 Phase ConnectionSTART-UP Checklist Special Voltage ConnectionsRemote Applications Operation Thermometer CalibrationCalibration Check Dial ThermometerDigital Thermometer Refrigerator System and Adjustment Freezer System and Adjustment Defrost Operation Evaporator Assembly LOW-PROFILE, CEILING-MOUNT Evaporator AssemblyInterior REACH-IN Accessories Shelving InstallationOptional Interior Accessories Safety Precautions Maintenance Periodic Cleaning Procedure PrecautionsGeneral Preventative Maintenance Sliding and Hinged GlassParts and Service Model # Serial # Troubleshooting and Servicing GuideProblem Probable Cause Correction Not start no humCondensing unit runs Product zone Wiring Diagrams Page Page Page Page Page

Refrigerators and Freezers specifications

Continental Refrigerator is a leader in the manufacturing and design of high-quality commercial refrigerators and freezers. Renowned for their durability and reliability, Continental Refrigerators are a staple in restaurants, grocery stores, and other commercial food service establishments.

One of the standout features of Continental Refrigerators is their robust construction. Built with stainless steel and corrosion-resistant materials, these units are designed to withstand the rigors of a busy kitchen. The exterior is sleek and easy to clean, while the interior is designed for efficiency and organization, often featuring adjustable shelves and easy-access compartments.

In terms of technology, Continental Refrigerators utilize state-of-the-art refrigeration systems that ensure precise temperature control. With digital temperature displays and intuitive controls, users can easily monitor and adjust settings to meet specific storage needs. Many models come equipped with energy-efficient compressors and eco-friendly refrigerants, aligning with modern sustainability practices without sacrificing performance.

The cooling technology employed in Continental Refrigerators ensures rapid temperature recovery after door openings, which is critical for maintaining food safety standards. The units are designed with powerful fans that promote optimal air circulation, helping to ensure uniform temperatures throughout the interior.

Another significant characteristic is the noise reduction technology implemented in many Continental models. These refrigerators are engineered to operate quietly, contributing to a more pleasant working environment.

Additionally, Continental Refrigerators are built for versatility. They offer a range of options, from undercounter models to walk-in coolers, catering to various business sizes and needs. The ability to customize configurations ensures that businesses can maximize space while still maintaining access to essential refrigerated items.

Lastly, the brand is recognized for its customer support and warranty options, providing peace of mind for operators. Overall, Continental Refrigerators and Freezers combine durability, efficiency, and cutting-edge technology, making them an excellent choice for any commercial kitchen looking to maintain food safety and quality.
Top Page Image Contents