Update Procedure

1 Press RECEIVER followed by HOME on the remote controller.

The Home menu appears on the TV screen.

2 Select “Firmware Update” and press ENTER. Note that the “Firmware Update” option will be grayed out for a short while after the AV receiver is turned on. Please wait until it becomes operable.

3 Select “Update via NET” and press ENTER.

Note that this option will not be available if there is no firmware file newer than the currently installed version.

4 Select “Update” and press ENTER. The update process will begin.

During the update process, the on-screen display may disappear depending on the updated program. When this occurs, you can still view the update progress on the AV receiver’s display. The on-screen display will reappear after the update is complete, and upon turning the AV receiver off and on again.

5 The message “Completed!” appears on the AV receiver’s display, indicating that the update has been completed.

6 Turn off the AV receiver using 8ON/STANDBY on the front panel.

Do not use 8RECEIVER on the remote controller. Once turned off, the AV receiver will automatically turn on again.

Congratulations! You now have the latest firmware installed on your Onkyo AV receiver.

Troubleshooting

Case 1:

If an error occurs, “Error!! *-**” is displayed on the AV receiver’s display. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action.

■Errors during an update via network

Error Code

Description

*-10,*-20

The Ethernet cable was not detected.

 

Reconnect the cable properly.

 

 

*-11,*-13,*-21,

Internet connection error.

*-28

Check the following items:

 

• Make sure the IP address, subnet mask,

 

gateway address, and DNS server are

 

configured properly.

 

• Make sure the router is turned on.

 

• Make sure the AV receiver and the router are

 

connected with an Ethernet cable.

 

• Make sure your router is configured properly.

 

See the instruction manual of the router.

 

• If your network allows only one client

 

connection and there is any other device

 

already connected, the AV receiver will not be

 

able to access the network. Consult your

 

Internet Service Provider (ISP).

 

• If your modem does not function as a router,

 

you will need a router. Depending on your

 

network, you may need to configure the proxy

 

server if necessary. See the document

 

provided by your ISP. If you are still unable to

 

access the Internet, the DNS or proxy server

 

may be temporarily down. Contact your ISP.

 

 

Others

Retry the update procedure from the beginning.

 

If the error persists, please contact Onkyo

 

Support (➔ page 86) and provide the error

 

code.

 

 

Case 2:

If an error occurs during the update process, disconnect then reconnect the AC power cord and try again.

En-84

Appendix

Case 3:

If you do not have an Internet connection to the network, please contact Onkyo Support (➔ page 86).

Page 83 Page 85
Page 84
Image 84
Onkyo HT-RC470 instruction manual En-84, Update Procedure, Troubleshooting, Errors during an update via network
Page 83 Page 85

HT-RC470 specifications

The Onkyo HT-RC470 is a powerful AV receiver designed to enhance your home theater experience with cutting-edge technologies and impressive audio performance. This model is a part of Onkyo's renowned lineup and showcases a blend of features that cater to both casual listeners and audiophiles.

At the heart of the HT-RC470 is its robust 7.2-channel amplification system, delivering an impressive 100 watts per channel. This ensures that your audio experiences are rich and immersive, with clear dialogue and dynamic soundscapes across various genres. The receiver supports high-resolution audio formats, allowing music lovers to enjoy every nuance in their favorite tracks.

One of the most notable features of the HT-RC470 is its compatibility with Dolby Atmos and DTS:X. These advanced sound technologies create a three-dimensional listening experience that transports you into the action of movies, games, and music. With object-based sound, audio can move freely around you, adding depth and realism.

The receiver also incorporates the latest HDMI technology, including 4K video pass-through and support for HDCP 2.2, making it future-proof for next-generation content. This ensures seamless connectivity with 4K Ultra HD TVs and other devices, providing stunning picture quality.

Onkyo has integrated several audio calibration technologies in the HT-RC470, such as AccuEQ, which automatically measures and adjusts speaker settings for optimal sound quality based on your room’s acoustics. This feature simplifies setup and ensures that you get the best possible performance with minimal effort.

In terms of connectivity, the HT-RC470 features an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital audio inputs, and USB connectivity for streaming music from your devices. Built-in Wi-Fi and Bluetooth capabilities allow for easy wireless streaming from your smartphone or tablet, adding to its versatility.

Furthermore, the receiver is app-controllable via Onkyo’s remote app, enabling adjustment of settings and playback from the convenience of your mobile device. This feature is particularly useful for users who prefer a more dynamic control experience.

The Onkyo HT-RC470 embodies a perfect balance of performance, modern features, and user-friendly design, making it a strong choice for anyone looking to enhance their home theater setup and enjoy a truly immersive audio-visual experience. With its thoughtful engineering and array of options, it is built to meet the demands of today’s multimedia environments.
Top Page Image Contents