Space:
Enters a space character. Shift*1:
Toggles between lower and upper case characters.
(Left)/ 
(Right):
Moves the cursor left or right in the Name input area.
Back Space*2:
Moves the cursor backward and deletes one character.
OK:
Confirms your entry.
Tip
*1 This can also be performed by using +10 on the remote controller.
*2 Press CLR on the remote controller to delete all the characters you have input.
Tip
•To name a radio preset, select AM or FM, and then select the preset (➔ page 31).
•To restore a name to its default, erase all characters with CLR, select “OK” and then press ENTER.
Note
• This setting cannot be used for the NET and USB input selectors.
Picture Adjust
Using Picture Adjust, you can adjust the picture quality and reduce any noise appearing on the screen.
To view the TV picture while setting, press ENTER. To return to the previous screen, press RETURN.
■Wide Mode*1*6
This setting determines the aspect ratio.
`4:3:
`Full:
`Zoom:
`Wide Zoom:
`Auto:
According to the input signals and monitor output setting, the AV receiver automatically selects the “4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See “Monitor Out” for details on the monitor output setting (➔ page 50).
En-59
Advanced Operations
■Picture Mode*1*7
`Custom:
All settings can be performed manually.
`Cinema:
Select when the picture source is a movie or alike.
`Game:
Select when the video source is a game console.
`Through:
Does not adjust picture quality (changes resolution).
`Direct:
Does not adjust picture quality (does not change resolution). The video coming from an analog input and output by HDMI output(s) is processed in the same way as “Through”.
With “Picture Mode”, you can change the following settings to be suitable for the movie or game screen by one operation; “Game Mode”, “Film Mode”, “Edge
Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue”, “Saturation” or “Color Temperature”.
■Game Mode*2*3*4
`Off
`On
If video signal delay occurs during playback on a video component (i.e., game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor.
