Note

•If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself.

■IP Address

`Class A:

“10.0.0.0” to “10.255.255.255”

`Class B:

“172.16.0.0” to “172.31.255.255”

`Class C:

“192.168.0.0” to “192.168.255.255”

Enter a static IP address provided by your Internet Service Provider (ISP).

Most routers use Class C IP addresses.

■Subnet Mask

Enter the subnet mask address provided by your ISP (typically 255.255.255.0).

■Gateway

Enter the gateway address provided by your ISP.

■DNS Server

Enter the DNS server address provided by your ISP.

■Proxy URL

To use a Web proxy, enter its URL here.

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Network Standby

`On

`Off

This setting enables or disables control over the network. When enabled, the NET indicator will be dimly-lit while the AV receiver is in standby mode. Note that the indicator may not light under certain conditions (➔ page 49).

Note

•When set to “On”, the power consumption slightly increases in standby mode.

■Update Notice

`Enable

`Disable

When this setting is enabled, you will be notified if a firmware update via network is available.

Note

•Selecting “Never Remind me” on the notification window will switch this setting to “Disable” (➔ page 19).

•For details on the update notification, see “If the “Firmware Update Available” window appears.” (➔ page 19).

Initial Setup

If you skipped the initial setup wizard, for example on first-time use, you can reaccess it from here.

See “Initial Setup” (➔ page 20).

En-66

 

 

 

Advanced Operations

Remote Controller Setup

1

2

3

4 “Setup” 5

Main Menu

Remote Controller Setup

Remote ID

■Remote ID

`1, 2, or 3

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from other components, you can change its remote ID from “1”, to “2” or “3”.

Note

•If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the remote controller’s ID

1

While holding down RECEIVER, press and hold

 

down Q SETUP until the remote indicator lights

 

(about 3 seconds).

2

Use the number buttons to enter ID 1, 2, or 3.

The remote indicator flashes twice.

Remote Mode Setup

See “Looking up for Remote Control Codes” (➔ page 72).

Page 65 Page 67
Page 66
Image 66
Onkyo HT-RC470 instruction manual En-66, Remote Controller Setup, Initial Setup, Remote ID, Remote Mode Setup
Page 65 Page 67

HT-RC470 specifications

The Onkyo HT-RC470 is a powerful AV receiver designed to enhance your home theater experience with cutting-edge technologies and impressive audio performance. This model is a part of Onkyo's renowned lineup and showcases a blend of features that cater to both casual listeners and audiophiles.

At the heart of the HT-RC470 is its robust 7.2-channel amplification system, delivering an impressive 100 watts per channel. This ensures that your audio experiences are rich and immersive, with clear dialogue and dynamic soundscapes across various genres. The receiver supports high-resolution audio formats, allowing music lovers to enjoy every nuance in their favorite tracks.

One of the most notable features of the HT-RC470 is its compatibility with Dolby Atmos and DTS:X. These advanced sound technologies create a three-dimensional listening experience that transports you into the action of movies, games, and music. With object-based sound, audio can move freely around you, adding depth and realism.

The receiver also incorporates the latest HDMI technology, including 4K video pass-through and support for HDCP 2.2, making it future-proof for next-generation content. This ensures seamless connectivity with 4K Ultra HD TVs and other devices, providing stunning picture quality.

Onkyo has integrated several audio calibration technologies in the HT-RC470, such as AccuEQ, which automatically measures and adjusts speaker settings for optimal sound quality based on your room’s acoustics. This feature simplifies setup and ensures that you get the best possible performance with minimal effort.

In terms of connectivity, the HT-RC470 features an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital audio inputs, and USB connectivity for streaming music from your devices. Built-in Wi-Fi and Bluetooth capabilities allow for easy wireless streaming from your smartphone or tablet, adding to its versatility.

Furthermore, the receiver is app-controllable via Onkyo’s remote app, enabling adjustment of settings and playback from the convenience of your mobile device. This feature is particularly useful for users who prefer a more dynamic control experience.

The Onkyo HT-RC470 embodies a perfect balance of performance, modern features, and user-friendly design, making it a strong choice for anyone looking to enhance their home theater setup and enjoy a truly immersive audio-visual experience. With its thoughtful engineering and array of options, it is built to meet the demands of today’s multimedia environments.
Top Page Image Contents