■DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode used when DTS or
Specifies the default listening mode for
■Other Multich Source
Specifies the default listening mode for multichannel PCM sources from HDMI IN such as
Miscellaneous
1 | 2 | 3 | 4 “Setup” 5 |
Main Menu | Miscellaneous |
Volume Setup
■Volume Display
`Absolute:
Displayed range is Min, 1 to 99, Max.
`Relative (THX):
Displayed range is
With this setting, you can choose how the volume level is displayed.
The absolute value 82 is equivalent to the relative value 0 dB.
Note
•If the absolute value is set to 82, “82Ref” will appear on the display and the THX indicator will flash.
■Muting Level
`
■Maximum Volume
`Off, 50 to 99 (Absolute display)
`Off,
With this setting, you can limit the maximum volume. To disable this setting, select “Off”.
Advanced Operations
■Power On Volume
`Last, Min, 1 to 99 or Max (Absolute display)
`Last,
To use the same volume level that was used when the AV receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher than the “Maximum Volume” setting.
■Headphone Level
`
With this setting, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones.