Using the Setup Menu (HOME)
Remote indicator
RECEIVER
| ENTER |
| q/w/e/r |
| RETURN |
| HOME |
1 | Press RECEIVER followed by HOME. |
2 | Use e/rto select “Setup”, and then press ENTER. |
3 | Use q/wto select a main menu item, and then press |
| ENTER. |
4 | Use q/wto select a sub menu item, and then press |
| ENTER. |
5 | Use q/wto select a setting target, and use e/rto |
| change the setting. |
Press HOME to close the menu.
Press RETURN to return to the previous menu.
Note
•This procedure can also be performed on the AV receiver by using SETUP, the cursor buttons, and ENTER.
•During Audyssey 2EQ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s display.
■Screen Saver
If there is no video signal on the current input source and no operation for a specific time (three minutes by default), a screen saver automatically comes on.
Tip
•The time until the screen saver activates itself can be changed in the “Screen Saver” setting (➔ page 63).
•The screen will return to its previous state if the AV receiver is operated.
Advanced Operations
Explanatory Notes
a | Main Menu | Speaker Setup |
bSpeaker Configuration
c■ Subwoofer
d`Yes `No
aMain Menu
bSub Menu
cSetting target
dSetting options (default setting underlined)
Sub MenuMain Menu