Using Basic Functions, En-32 | Onkyo HT-RC470 specification

Using Basic Functions

Using the Automatic Speaker Setup

With the supplied calibrated microphone, Audyssey 2EQ® automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position. Audyssey 2EQ then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Audyssey 2EQ can be used with Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (➔ page 57).

Before using this function, connect and position all of your speakers.

Audyssey 2EQ offers two ways of measuring: the “Audyssey Quick Start” and “Audyssey 2EQ Full

Calibration”.

•“Audyssey Quick Start” uses the measurement from one position to perform the speaker setting only.

•“Audyssey 2EQ Full Calibration” uses the measurement from three positions to correct room response in addition to the speaker setting.

The more positions are used in measuring, the better the listening environment will become. We recommend using a measurement from three positions to create the best listening environment.

The Quick Start takes 2 minutes and Full Calibration takes about 10 minutes.

Total measurement time varies depending on the number of speakers.

Measurement procedure

To create a listening environment in your home theater that all listeners will enjoy, Audyssey 2EQ takes measurements at up to three positions within the listening area. Position the microphone at ear height of a seated listener with the microphone tip pointed directly at the ceiling using a tripod. Do not hold the microphone in your hand during measurements as this will produce inaccurate results.

aFirst measurement position

Also referred to as the Main Listening Position, this refers to the most central position where one would normally sit within the listening environment.

Audyssey 2EQ uses the measurements from this position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

bSecond measurement position The right side of the listening area.

cThird measurement position The left side of the listening area.

The distances from position a to b and a to c must be at least 1 meter (3.3 ft.).

cab

: Listening area a to c: Listening position

En-32

Turning On & Basic Operations

Note

•Make the room as quiet as possible. Background noise and Radio Frequency Interference (RFI) can disrupt the room measurements. Close windows, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices. Turn off the cell phone (even if it is not in use) or place it away from all audio electronics.

•The microphone picks up test tones played through each speaker as Audyssey 2EQ Room Correction and Speaker Setup runs.

•Audyssey 2EQ Room Correction and Speaker Setup cannot be performed while a pair of headphones is connected.

HT-RC470 specifications

The Onkyo HT-RC470 is a powerful AV receiver designed to enhance your home theater experience with cutting-edge technologies and impressive audio performance. This model is a part of Onkyo's renowned lineup and showcases a blend of features that cater to both casual listeners and audiophiles.

At the heart of the HT-RC470 is its robust 7.2-channel amplification system, delivering an impressive 100 watts per channel. This ensures that your audio experiences are rich and immersive, with clear dialogue and dynamic soundscapes across various genres. The receiver supports high-resolution audio formats, allowing music lovers to enjoy every nuance in their favorite tracks.

One of the most notable features of the HT-RC470 is its compatibility with Dolby Atmos and DTS:X. These advanced sound technologies create a three-dimensional listening experience that transports you into the action of movies, games, and music. With object-based sound, audio can move freely around you, adding depth and realism.

The receiver also incorporates the latest HDMI technology, including 4K video pass-through and support for HDCP 2.2, making it future-proof for next-generation content. This ensures seamless connectivity with 4K Ultra HD TVs and other devices, providing stunning picture quality.

Onkyo has integrated several audio calibration technologies in the HT-RC470, such as AccuEQ, which automatically measures and adjusts speaker settings for optimal sound quality based on your room’s acoustics. This feature simplifies setup and ensures that you get the best possible performance with minimal effort.

In terms of connectivity, the HT-RC470 features an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital audio inputs, and USB connectivity for streaming music from your devices. Built-in Wi-Fi and Bluetooth capabilities allow for easy wireless streaming from your smartphone or tablet, adding to its versatility.

Furthermore, the receiver is app-controllable via Onkyo’s remote app, enabling adjustment of settings and playback from the convenience of your mobile device. This feature is particularly useful for users who prefer a more dynamic control experience.

The Onkyo HT-RC470 embodies a perfect balance of performance, modern features, and user-friendly design, making it a strong choice for anyone looking to enhance their home theater setup and enjoy a truly immersive audio-visual experience. With its thoughtful engineering and array of options, it is built to meet the demands of today’s multimedia environments.

Onkyo HT-RC470 instruction manual Using Basic Functions, En-32, Using the Automatic Speaker Setup

Models: HT-RC470