4-2. Defrost Mode
INPUT |
| CONTROL OBJECT | |
|
| 1. Comp | |
1. Defrosting Cycle |
| 2. |
|
| 3. | ||
|
| ||
|
| 4. |
|
|
|
|
|
| CONTENTS | REMARKS | |
1. Defrost Mode |
|
|
|
|
| |
| 1) | Time : 50 minutes |
| 2) Comp , | |
| ||
|
| |
|
| |
| 3) | If |
Heater | Heater |
Defrosting | |
Defrosting | 1) Comp, |
|
|
| |
| 2) Time limit |
| 30 seconds : Heater is ON regardless of |
| temperature right after defrosting start |
| 30 minutes : in case of D1- Error |
| 80 minutes : in normal control state |
| 3) If |
Pause | Pause | |
| Time : 7 minutes | |
| Comp, | |
| ||
| ||
1) Time : 5 minutes | ||
| ||
| Comp : ON and | |
|
2.The defrost mode start with the following conditions
1)Total operation time of comp. becomes : 6,8,10,……… 24 hours.
①Comp. operating rate : more 85%
②Total door open time : 2 minutes
(Any door, F or R open time is over 2 minutes.)
③ Any error mode : R1, F1, D1, F3, RT/S,
2)Defrosting mode starts unconditionally as long as total comp. work time is 24 hours, even if the above conditions 1) are not satisfied.
3)Defrosting mode starts immediately as long as total time of [comp. ON + comp. OFF] is over 60 hours, even if the above 1) and 2) conditions are not satisfied.
3.In providing initial power (or returning power failure)
If
14