Daewoo frs20 manual Error Display, Basic Model LED Display of Inner Control

4-10. Error Display

4-10-1. Basic Model (LED Display of Inner Control)

INPUT

CONTROL OBJECT

Temperature Control Buttons

Lamp LED of Inner control

CONTENTS REMARKS

1.How to start

1)Press “FRZ.TEMP” button 5 times while pressing “REF.TEMP” button at the same time.

2.How to stop

1)Push “FRZ.TEMP” button 1 time.

2)It stops automatically in 4 minutes from the start.

3.All the error codes are reset if they turn to be normal.

4.Error display

CONTENTS	Display
F-sensor : open (“Lo”), short (“Hi”)	FRZ. LED “5” is on and off
R-sensor : open (“Lo”), short (“Hi”)	FRZ. LED “4” is on and off
RT-sensor : open (“Lo”), short (“Hi”)	FRZ. LED “3” is on and off
D-sensor : open (“Lo”), short (“Hi”)	FRZ. LED “2” is on and off
R-Door Switch : defective	FRZ. LED “1” is on and off
F-Door Switch : defective	REF. LED “5” is on and off
Cycle : defective	REF. LED “3” is on and off
Return after defrosting : defective	REF. LED “2” is on and off
EEPROM : defective	REF. LED “1” is on and off
Full Down mode	REF. LED “1” is on
Forced defrost mode for A/S	REF. LED “1” is on and off (twice)

(Full down mode and forced defrost mode are displayed while pressing “REF.TEMP” button at the error display mode)

20