Whirlpool RS20CK, RS22AR Condition Check if, Exterior moisture control, Adjusting refrigerator

Condition

Check if Set control setting

Refrigerator section

TOO WARM

Freezer section

TOO WARM

1 Door is opened often.

1Large amount of food added.

1Too-warm room temperature.

. Door is opened often.

. Large amount of food added.

nToo-cold room temperature (freezer can’t cycle often enough).

Refrigerator 4

Freezer A

Refrigerator 3

Freezer C

Both sections

TOO WARM

Refrigerator section

TOO COLD

Ice is not made fast enough

Exterior moisture control

.	Door is opened	often.	Refrigerator	4
n	Large amount	of food added.	Freezer	B
. Too-warm or too-cold room
	temperatures.
1	Controls not set correctly.		Refrigerator	2
			Freezer	B
.	Heavy ice usage.		Refrigerator	3
.	Very cold room temperature		Freezer	C
	(freezer can’t cycle often enough).

Adjusting refrigerator	Removing crisper, meat
	drawer and cover
	i

The Exterior Moisture Control on the control console operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the OFF setting when humidity is low.

2.Use the ON setting if moisture forms on the outside of the refrigerator.

Adjusting meat drawer temperature

The meat drawer temperature control lets more or less cold air flow from an opening between the freezer and the refrigerator. This helps to keep the meat drawer colder than the rest of the refrig- erator. Slide the control to coldness level you want.

Shelves can be adjusted according to the way you use your refrigerator.

To remove:

1, Remove food from shelf.

2.Tilt up front.

3.Lift up back until hooks clear the shelf support slots.

4.Pull shelf straight out.

To replace:

1.Guide the rear shelf hooks into shelf support slots.

2.Tilt up front until hooks drop into slots. Lower front of shelf to level position.

For models RS22ARand RS25AW:Glass shelves are strong enough to hold bottles, milk and other heavy food items. Be careful when removing or replacing glass shelves-they are heavy!

To remove crisper and meat drawer:

1.Slide crisper or meat drawer

straight forward to the guide stops.

2.Lift front until it clears stops.

3.Slide crisper or meat drawer out the rest of the way.

4.Replace in reverse order.

To remove covers:

1.Push up glass insert from the bottom, then slide out with both hands. (Be careful-the glass is heavy!)

2.Lift front of cover frame and pull up and out.

Continued on next page

Page 5