Pioneer VSX-LX70 manual OSD Adjustment, Select the ‘PDP Volume Control’ setting you want

Other Settings 10

2Select the ‘PDP Volume Control’ setting you want.

•OFF – The receiver does not control the volume of the plasma display.

•ON – When the receiver is switched to one of the inputs that use the plasma display (DVD/LD, for example), the volume on the plasma display is muted so only sound from the receiver is heard.

3Assign any input source connected to the plasma display to the corresponding input number.

This matches the receiver’s input source with a numbered video input on the plasma display. For example, assign DVD/LD to input-2if you have connected the your DVD video output to video input 2 on the plasma display.

•The Monitor Out Connect should be set to the input that you’ve used to connect this receiver to your plasma display.

DVD/LD	- 55.0dB
8c. SR+ Setup
PDP Volume Control
[	OFF ]

Monitor Out Connect

OFF

:Finish

4When you’re finished, press RETURN. You will return to the Other Setup menu.

OSD Adjustment

Use this feature to adjust your TV display if it seems difficult to see all the instructions on the screen.

1Select ‘OSD Adjustment’ from the Other Setup menu.

DVD/LD	- 55.0dB	A
8. Other Setup

a. Multi Ch In Setup

b. ZONE Audio Setup

c. SR+ Setup

d. HDMI Control Setup

e . OSD Adjustment

:Return A

A

X=0 , Y=0

[ Finish ]

:Cancel

A

2 Useto move the display field around until you get one that you feel best suits your TV.

3When you’re finished, press ENTER. You will return to the Other Setup menu.

67

En