![04Controls and displays](/images/new-backgrounds/30251/3025147x1.webp)
04Controls and displays
Chapter 4:
Controls and displays
Front panel
Illustration shows the
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
STANDBY/ON
PHASE | ADVANCED | DIGITAL PRECISION | DIGITAL VIDEO |
CONTROL | MCACC | PROCESSING | SCALER |
HDMI
PHASE | MCACC | AUTO SURR/ | HOME | STANDARD | ADVANCED |
CONTROL | POSITION | STREAM DIRECT | THX | SURROUND | SURROUND |
INPUT |
|
|
|
| MASTER |
SELECTOR |
|
|
|
| VOLUME |
9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 |
AUDIO | PARAMETER VIDEO |
SPEAKERS | (TUNE) |
TUNER EDIT BAND |
PHONES | ENTER | (ST) |
| MCACC |
(ST) | USB | SETUP MIC |
MULTI – ZONE & | SIGNAL | SB ch | STEREO/ | |
SOURCE/REC SEL | ||||
CONTROL | ON/OFF | SELECT | PROCESSING | F.S.SURR |
VIDEO/GAME 2 INPUT
SETUP (TUNE) RETURN
DIGITAL IN | L AUDIO R |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
1INPUT SELECTOR dial Use to select an input source.
2STANDBY/ON
4 Remote sensor
Receives the signals from the remote control (see Operating range of remote control unit on page 25).
Switches the receiver between on and standby. Power indicator lights when the receiver is on.
3PHASE CONTROL – Press to switch on/off Phase Control or Full Band Phase Control (page 10).
MCACC POSITION – Press to switch between MCACC presets (page 32).
AUTO SURR/STREAM DIRECT – Press to select Auto Surround (page 29) or Stream Direct (page 31) listening.
5Character display See Display on page 26.
6PHASE CONTROL indicator – Lights to indicate Phase Control or Full Band Phase Control is selected (page 10).
ADVANCED MCACC indicator – Lights when one of the MCACC presets (page 32) is selected.1
Digital Precision Processing indicator – Lights to indicate digital processing (for example, it disappears when Pure Direct (page 31) is on, or when listening through the multichannel analog inputs).
Note
1The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 68).
24
En