Pioneer VSX-LX70 manual Using other functions, Setting the Video options, What it does, Options

Using other functions 11

Setting What it does Option(s)

a.When MCACC OFF is selected, all MCACC preset memories become deactivated.

LFE ATT

(LFE

Attenuate)

Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

The LFE is not limited when set to 0 dB, which is the recommended value. When set to –5 dB, –10 dB, –15 dB or –20 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel.

0dB

–5dB/ –10dB/ –15dB/ –20dB/

OFF

b.When EQ OFF is selected, the MCACC indicator does not light even when a MCACC preset memory is selected.

c.The adjustment can be made only when TONE is set to ON.

d.The initially set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD.

e. You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the gain setting back to 0 dB.

f. This feature is only available when the connected display supports the

automatic audio/video synchronizing capability (‘lip-sync’) for HDMI or

HDMI Control. If you find the automatically set delay time unsuitable, set

A. DELAY to OFF and adjust the delay time manually. For more details

about the lip-sync feature of your display, contact the manufacturer

directly.

g.Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/

Dolby Pro Logic II Music mode.

SACD	Brings out detail in SACDs by	0 to 6 (dB)
GAINe	maximizing the dynamic range	Default: 0 (dB)
	(during digital processing).
HDMI	Specifies the routing of the HDMI	AMP
(HDMI	audio signal out of this receiver
		THROUGH
Audio)	(amp) or through to a TV or plasma
	display. When THROUGH is
	selected, no sound is output from
	this receiver.
A. DELAY	This feature automatically corrects	OFF
(Auto delay)	the audio-to-video delay between
		ON
	components connected with an
	HDMI cable. The audio delay time is
	set depending on the operational
	status of the display connected with
	an HDMI cable. The video delay time
	is automatically adjusted according
	to the audio delay time.f
C. WIDTHg	Provides a better blend of the front	0 to 7
(Center	speakers by spreading the center	Default: 3
Width)	channel between the front right and
(Applicable	left speakers, making it sound wider
only when	(higher settings) or narrower (lower
usingacenter	settings).
speaker)
DIMENSIONg	Adjusts the depth of the surround	–3 to +3
	sound balance from front to back,	Default: 0
	making the sound more distant
	(minus settings), or more forward
	(positive settings).
PANORAMAg	Extends the front stereo image to	OFF
	include the surround speakers for a
		ON
	‘wraparound’ effect.
C. IMAGEh	Adjusts the center image to create a	0 to 10
(Center	wider stereo effect with vocals.	Default: 3
Image)	Adjust the effect from 0 (all center
(Applicable	channel sent to front right and left
only when	speakers) to 10 (center channel sent
usingacenter	to the center speaker only).
speaker)
EFFECT	Sets the effect level for the currently	10 to 90
	selected Advanced Surround mode
	(each mode can be set separately).

h.Only when listening to 2-channel sources in Neo:6 Music mode.

Setting the Video options

There are a number of additional picture settings you can make using the Video Parameter menu. The defaults, if not stated, are listed in bold.

Important

•Note that if a setting doesn’t appear in the Video Parameter menu, it is unavailable due to the current source, setting and status of the receiver.

1 Press V PARAMETER (VIDEO PARAMETER).

2 Use to select the setting you want to adjust.

Depending on the current status/mode of the receiver, certain options may not be able to be selected. Check the table below for notes on this.

3 Use to set it as necessary.

See the table below for the options available for each setting.1

4 Press RETURN to confirm and exit the menu.

Setting	What it does	Option(s)
V. CONV	Converts video signals for output	ON
(Digital Video	from the MONITOR OUT jacks for
		OFF
Conversion)	all video types.
BRIGHT	Adjusts the overall brightness.	–10 to +10
(Brightness)		Default: 0
CONTRAST	Adjusts the contrast between light	–10 to +10
	and dark.	Default: 0
HUE	Adjusts the red/green balance.	–10 to +10
		Default: 0
CHROMA	Adjusts saturation from dull to	–10 to +10
	bright.	Default: 0

Note

1 Brightness, Contrast, Hue, Chroma, Resolution and Aspect can be set for each input source.

69

En