Connecting your equipment | 03 |
Using an external antenna to improve AM reception
To improve AM reception, connect a 5 m to 6 m length of
For the best possible reception, suspend horizontally outdoors.
Outdoor antenna
Indoor antenna
5 m to 6 m
ANTENNA
FM UNBAL 75 Ω |
|
| AM LOOP |
Plugging in the receiver
After you’ve finished making all connections, plug the receiver into an AC outlet.
The type of cord and the plug converter which can be used depends on the power voltage in each region or country. Please make sure you use the correct cord and plug converter due to the possibility of fire or other hazard if used incorrectly (see below).
AC power cord and converter plug use
Region | Plug type |
For European type region |
|
Caution |
|
Do not use this power cord |
|
set in Singapore and |
|
Malaysia. | European |
For regions with two pin flat- bladed plug
European
Caution
•Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement.
•Do not use any power cord other than the one supplied with this unit.
•Do not use the supplied power cord for any purpose other than that described below.
•The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation.
•Make sure the blue STANDBY/ON light has gone out before unplugging.
1Plug the supplied power cord into the AC IN socket on the back of the receiver.
2Plug the other end into a power outlet.
23
En
