Pioneer VSX-LX70 manual Other Settings, Multi Channel Input Setup, Zone Audio Setup

10Other Settings

Multi Channel Input Setup

You can adjust the level of the subwoofer for a multi- channel input. Also, when the multi-channel input is selected as an input source, you can display the video images of other input sources. In the Multi Channel Input Setup, you can assign a video input to the multi-channel input.

1Select ‘Multi Ch In Setup’ from the Other Setup menu.

DVD/LD	- 55.0dB
8. Other Setup

a. Multi Ch In Setup

b. ZONE Audio Setup

c. SR+ Setup

d. HDMI Control Setup

e . OSD Adjustment

:Return

2Select the ‘SW Input Gain’ setting you want.

•0dB – Outputs sound of the subwoofer at the level originally recorded on the source.

•+10dB – Outputs sound of the subwoofer at the level increased by 10 dB.

DVD/LD	- 55.0dB
8a. Multi Ch In Setup
SW Input Gain
	0dB

Video Input [ DVD ]

:Finish

3Select the ‘Video Input’ setting you want. When the multi-channel input is selected as an input source, you can display the video images of other input sources. The video input can be selected from the following: DVD/LD, BD, TV/SAT, DVR/VCR1, DVR/ VCR2, VIDEO/GAME1, VIDEO/GAME2.

DVD/LD	- 55.0dB
8a. Multi Ch In Setup
SW Input Gain	[ 0dB ]
Video Inpu
	BD

:Finish

4When you’re finished, press RETURN. You will return to the Other Setup menu.

ZONE Audio Setup

If you’ve made MULTI-ZONE connections (see MULTI- ZONE listening on page 56) you may need to specify your volume setting.

1Select ‘ZONE Audio Setup’ from the Other Setup menu.

DVD/LD		- 55.0dB		DVD/LD		- 55.0dB
8. Other Setup				8b. ZONE Audio Setup
	a. Multi Ch In Setup			ZONE 2 / RECSEL Setting
				ZONE 2 Volume		RECSEL
	b. ZONE Audio Setup				Level
	c. SR+ Setup		[			– – – ]
	d. HDMI Control Setup
	e . OSD Adjustment
		:Return				:Finish

2Select the ‘ZONE 2 / RECSEL Setting’ you want. You can select the ZONE 2 or RECSEL setting.

•ZONE 2 – Sound is output from MULTI ZONE & SOURCE ZONE2 OUT jack.

•RECSEL – Sound is output from the CD-R/TAPE OUT, DVR/VCR1 OUT or DVR/VCR2 OUT jack. For details, see Playing a different source when recording on page 70.

3Select the volume level setting.1

•Variable – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a pre-amp) and you will be using this receiver’s controls to adjust the volume.

•Fixed – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls. (This setting is not available if the surround back system setting is set to ZONE 2.)

With the Fixed setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub zone at first and then experiment to find the correct level.

4When you’re finished, press RETURN. You will return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of function settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 59 and Using the SR+ mode with a Pioneer plasma display on page 60.

1 Select ‘SR+ Setup’ from the Other Setup menu.

DVD/LD		- 55.0dB		DVD/LD	- 55.0dB
8. Other Setup				8c. SR+ Setup
	a. Multi Ch In Setup			PDP Volume Control
	b. ZONE Audio Setup				OFF
	c. SR+ Setup			Monitor Out Connect
	d. HDMI Control Setup
	e . OSD Adjustment		[		OFF ]
		:Return			:Finish

Note

1 If you selected ZONE 2 in the Surround back speaker setting on page 40, you won’t be able to change the volume level.

66

En