Controls and displays | 04 |
DIGITAL VIDEO SCALER indicator – Lights when Resolution is set to a setting other than PURE (for example, when the video input signal is upscaled) (page 68).
HDMI indicator – Blinks when connecting an HDMI- equipped component; lights when the component is connected (page 52).
7Listening mode buttons
HOME THX – Press to select a Home THX listening mode (page 30).
STANDARD SURROUND – Press for Standard decoding and to switch between the various
2 Pro Logic IIx and Neo:6 options (page 29).
ADVANCED SURROUND – Use to switch between the various surround modes (page 30).
8MASTER VOLUME dial
9Front panel controls
To access the front panel controls, push gently on the lower third portion of the panel with your finger.
10 | SPEAKERS |
|
Use to change the speaker system (page 54). | ||
11 | AUDIO PARAMETER | |
Use to access the Audio options (page 68). | ||
12 | VIDEO PARAMETER | |
Use to access the Video options (page 69). | ||
13 | TUNER EDIT | |
Use with | to memorize and name stations for recall | |
(page 36). |
|
14 BAND
Switches between AM and FM radio bands (page 35).
15
If you’ve made
You will also need to use the REC SEL controls when recording a source (see Making an audio or a video recording on page 70).
16 SIGNAL SELECT
Use to select an input signal (page 32).
17 SBch PROCESSING
Selects the surround back channel mode (page 32) or virtual surround back mode (page 33).
18 STEREO/F.S.SURR
Switches between the stereo playback mode (page 31) and the Front Stage Surround Advance mode (page 31).
19 PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.
20 SETUP
Press to access the System Setup menu (see page 37).
21(TUNE/ST) /ENTER
Use the arrow buttons when setting up your surround
sound system (see page 37). Use the TUNE | buttons |
to find radio frequencies and use ST | to find preset |
stations (page 36). |
|
22 RETURN
Press to confirm and exit the current menu screen.
23USB interface
See the separate manual for HOME MEDIA GALLERY.
24MCACC SETUP MIC jack
Use to connect the supplied microphone.
25 VIDEO/GAME 2 INPUT
See Connecting a component to the front panel inputs on page 18.
Operating range of remote control unit
The remote control may not work properly if:
•There are obstacles between the remote control and the receiver’s remote sensor.
•Direct sunlight or fluorescent light is shining onto the remote sensor.
•The receiver is located near a device that is emitting infrared rays.
•The receiver is operated simultaneously with another infrared remote control unit.
30 30
7 m
25
En