Pioneer VSX-LX70 manual Copying MCACC preset data, Renaming MCACC presets, Clearing MCACC presets

The System Setup menu 07

1Select ‘MCACC Data Check’ from the Data Management setup menu.

DVD/LD		- 55.0dB	DVD/LD			- 55.0dB
5. Data Management			5a		. MCACC Data Check
	a. MCACC Data Check		1	. Speaker Setting
	b. Memory Rename			2	. Channel Level
	c. MCACC Memory Copy		3		. Speaker Distance
	d. MCACC Memory Clear		4		. Standing Wave
	e . Output PC		5		. Acoustic Cal EQ
			6		. FULL BAND PHASE CTRL

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration EQ (see Manual MCACC setup above), we recommend

copying your current settings1 to an unused MCACC preset. Instead of just a flat EQ curve, this will give you a reference point from which to start.

:Return ENTER:Next :Return

2Select the setting you want to check.

•It is useful to do this while a source is playing so you can compare the different settings.

3Select the MCACC preset that you want to check.

Use the	buttons if necessary to switch speakers/
settings.
		DVD/LD				- 55.0dB
		5a5. EQ Data Check
		MCACC			M1	63Hz : +0.5
	Ch			[SBL]		125Hz : -5.5
	dB					250Hz : +3.0
						500Hz : 0.0
						1kHz :+12.0
						2kHz : +5.5
						4kHz : -3.0
			63 125 250 500 1k 2k	4k 8k 16k TRIM
						8kHz : 0.0
						16kHz : +7.0
			:Return			TRIM : -2.5

4Press RETURN to go back to the Data Check menu, repeating steps 2 and 3 to check other settings.

5When you’re finished, press RETURN.

You will return to the Data Management setup menu.

Renaming MCACC presets

If you have several different MCACC presets that you’re using, you may want to rename them for easier identification.

1Select ‘Memory Rename’ from the Data Management setup menu.

DVD/LD		- 55.0dB	DVD/LD			- 55.0dB
5. Data Management			5b. Memory Rename
	a. MCACC Data Check		MCACC Position Rename
			M1
	b. Memory Rename			MEMORY	1
	c. MCACC Memory Copy		M2	[ MEMORY	2	]
	d. MCACC Memory Clear		M3	[ MEMORY	3	]
	e . Output PC		M4	[ MEMORY	4	]
			M5	[ MEMORY	5	]
			M6	[ MEMORY	6	]
		:Return			:Finish

2Select the MCACC preset you want to rename, then select an appropriate preset name.

Use	to select the preset, then	to select a
preset name.

3Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.

You will return to the Data Management setup menu.

Note

1Select ‘MCACC Memory Copy’ from the Data Management setup menu.

DVD/LD		- 55.0dB	DVD/LD	- 55.0dB
5. Data Management			5c. MCACC Memory Copy
	a. MCACC Data Check		Copy
			From	All Data
	b. Memory Rename
	c. MCACC Memory Copy		[ M1. MEMORY 1 ]
	d. MCACC Memory Clear		To
	e . Output PC		[ M2. MEMORY 2 ]
			Start Copy	[Cancel ]
		:Return		:Cancel

2Select the setting you want to copy.

•All Data – Copies all the settings of the selected MCACC preset memory.

•LEVEL & DISTANCE – Copies only the channel level and speaker distance settings of the selected MCACC preset memory.

3Select the MCACC preset you’ll be copying the settings ‘From’ then specify where you want to copy them (‘To’).

Make sure you don’t overwrite an MCACC preset you’re currently using (this can’t be undone).

4Select ‘Copy’ to confirm and copy the settings. Completed shows in the OSD to confirm the MCACC preset has been copied, then you automatically return to the Data Management setup menu.

Clearing MCACC presets

If you are no longer using one of the MCACC presets stored in memory, you can choose to clear the calibration settings of that preset.

1Select ‘MCACC Memory Clear’ from the Data Management setup menu.

DVD/LD		- 55.0dB	DVD/LD		- 55.0dB
5. Data Management			5d. MCACC Memory Clear
	a. MCACC Data Check		Clear
	b. Memory Rename
	c. MCACC Memory Copy			M1. MEMORY 1
	d. MCACC Memory Clear
	e . Output PC		Start clear		[Cancel]
		:Return			:Cancel

2Select the MCACC preset you want to clear. Make sure you don’t clear an MCACC preset you’re currently using (this can’t be undone).

3Select ‘Clear’ to confirm and clear the preset.

Completed shows in the OSD to confirm the MCACC preset has been cleared, then you automatically return to the Data Management setup menu.

1The settings made in Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 37.

47

En