Whirlpool GC1SHAXM manual User Interface

The user interface allows the customer to adjust the temperatures, choose what kind of ice to be dispensed, and monitor the remain- ing water filter capacity. There are also lockout modes for the temperature controls and the ice and water dispenser. The temperatures are only displayed in Fahrenheit.

Each function is described below.

ON/OFF—Press the keypad for 2 seconds to turn the unit on and off.

When the unit is turned “off”:

•Only the central decimal point shows in both temperature displays.

•All functions are disabled.

•All lamps and lights are off.

When the unit is turned “on”:

•All functions are restored at power-up.

•Temperature settings before power- down are remembered.

•Fast Freeze and/or Grocery Savor mode will be discontinued after power- up, if selected prior to power-down.

•The compressor will wait 7 minutes to start.

•The condenser fan will wait 1 minute to start after the compressor starts.

NOTE: At the first power-up, the control will start in the following DEFAULT operating mode:

•Unit is in the “On” state.

•Freezer temperature is set at 0ºF; Re- frigerator temperature set at 37ºF.

•Self Diagnostic Mode enabled for 10 minutes.

•Ice in Cube mode.

•Dispenser light “off”.

•Time to defrost will be set at 30 hours of compressor run time, or 50 hours actual time.

FREEZER (Temperature Settings)—Adjust- ment ranges from –5°F to +5°F. Each time the COLD or COLDER keypad is pressed, the set temperature will raise or lower 1°F. The display shows only the set temperature.

REFRIGERATOR (Temperature Settings)— Adjustment ranges from 33°F to 41°F. Each time the COLD or COLDER keypad is pressed, the set temperature will raise or lower 1°F. The display shows only the set temperature.

FAST FREEZE—Pressing this keypad places the freezer section into continuous cool-down mode for 24 hours. The control will then return to the last freezer set temperature. While in this mode, the FAST FREEZE keypad is illumi- nated. Pressing the keypad a second time will terminate the FAST FREEZE mode. The refrig- erator section temperature is not affected.