Whirlpool GLT3615G Surface burner grates and caps, Surface burners, Stainless steel surfaces

Page 12

CARING FOR YOUR COOKTOP

Cleaning chart (cont.)

PART

CLEANING METHOD

SPECIAL INSTRUCTIONS

Surface burner grates and caps*

Light to moderate soil

Soap and water

 

Non-abrasive plastic scrubbing pad

 

Dishwasher

Heavy burned on soils

Non-abrasive plastic scrubbing pad

 

Mild abrasive powdered cleanser

 

and water

Surface burners

Clean as soon as they become dirty.

Wash, rinse and dry well.

Grates only (not caps).

Repeat steps of cleaning process (with items at left) as needed, until soil is completely removed.

Rinse thoroughly and dry.

NOTE: Do not reassemble caps on burners while wet.

See “Sealed surface burners and cooktop” in the “Caring for your cooktop” section.

Stainless steel surfaces

(some models)

Do not use steel wool or soap-filled scouring pads.

Rub in the direction of the grain line to avoid marring the surface.

Always wipe dry to avoid water marks.

If commercial cleaners are used, follow label directions. If product contains chlorine (bleach), wipe thoroughly with clean water and dry with a soft lint-free cloth.

Chlorine is a corrosive substance.

Routine cleaning and

Liquid detergent/soap and water,

Wipe with damp cloth or sponge,

fingerprints

or all-purpose cleaner

then wipe with clean water and dry.

Stubborn stains and baked-on

Mildly abrasive cleanser or

To avoid marring the surface, rub

residue

stainless-steel cleaners

in the direction of grain lines with

 

 

a damp cloth or sponge and

 

 

cleanser. Wipe thoroughly with

 

 

clean water. Repeat if necessary.

Hard water spots

Vinegar

Swab or wipe with cloth. Wipe

 

 

with clean water and dry.

12

Image 12
Contents Parts and Features Using Your Cooktop 3192743U.S.A., call our Consumer Assistance Center toll-free Thank you for buying a WHIRLPOOL* applianceCooktop Safety On nextImportant Safety Instructions Parts and Features Control panelLeft rear burner Control knobParts and Features Left front burner Right front burner Control knobUsing Your Cooktop Using the surface burnersWhen to use the left front burner Model GLT3615G Using the control knobs Burner heat settingsEnergy saving tips Characteristics of cookware materials Cleaning chart Caring for Your CooktopControl Knobs Control PanelSurface burner grates and caps Surface burnersStainless steel surfaces Cleaning the surface burners Sealed surface burners and cooktopTo clean the burners Troubleshooting Problem Possible Cause SolutionRequesting Assistance or Service If you need assistance or service in the U.S.AIf you need assistance or service in Canada Warranty FSP* replacement parts and repair labor to correct defectsMaterials or workmanship. Service must be provided by Whirlpool designated service company’utilisation et d’entretien Veuillez inscrire les renseignements concernant votre modèle Sécurité de la table de cuisson Votre sécurité et celle des autres est importanteConservez CES Instructions Tableau de commande Pièces et caractéristiquesModèle GLT3615G 6000 BTU 9000 BTUSous la table De cuisson 12500 BTUUtilisation de la table de cuisson Utilisation des brûleurs de surfaceQuand utiliser le brûleur avant gauche Modèles SCS3014G, SCS3614G, GLT3014G GLT3614GUtilisation des brûleurs de surface suite Utilisation des boutons de commande Réglage de chaleur des brûleursConseils pour économiser l’énergie Caractéristiques des matériaux des ustensiles de cuisson Entretien de la table de cuisson Tableau de nettoyageSurface de la table de cuisson Tableau de nettoyage suite Pièce Méthode DE Nettoyage Instructions SpécialesBrûleurs de surface scellés et table de cuisson Nettoyage des brûleurs de surfaceSuite Pour nettoyer les brûleurs Guide de diagnostic Problème Cause Possible SolutionDemande d’assistance ou de service Si vous avez besoin de service† …Demande dassistance ou de service au Canada Garantie de la table De cuisson à gaz UN AN