Whirlpool W10200283A Remove Doors and Hinges, Freezer drawer models, Freezer door models, Cabinet

Page 6

Remove Doors and Hinges

Style 1–Standard Door

Hex-Head Top Hinge Screw

Freezer drawer models

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator door closed until you are ready to lift it free from the cabinet.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door free from the cabinet.

4.Remove the parts for the bottom hinge as shown in Bottom Hinge graphic.

Freezer door models

1.Unplug refrigerator or disconnect power.

2.Keep the freezer door closed until you are ready to lift it free from the cabinet.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door free from the cabinet.

4.Remove the center hinge pin and remove the hinge screws as shown in the Center Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the bottom hinge as shown in Bottom Hinge graphic.

Style 2–French Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

4.Remove the shim (on some models) from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

5.Before removing the left-hand side door, disconnect the wiring plug located on top of the top hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Wiring Plug graphic.

NOTE: The green, ground wire remains attached to the hinge.

6.Remove the parts for the left-hand side door top hinge as shown in the Top Hinge graphic. Lift the door from the bottom hinge pin.

NOTE: On some models, remove the shim from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Reverse Door - Standard Door (optional)

IMPORTANT: If you want to reverse your door so it opens from the opposite side, follow these steps. If you are not reversing the door, see “Replace Door and Hinges.”

Door Stop Screw

Door Handle Seal Screw Front

Flat-Head Handle Screw

Cabinet Hinge Hole Plug

Cabinet

1.Remove hinge screws from handle side and move them to opposite side. See Graphic 1-1.

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown in Graphic 1-2.

Refrigerator door

1.Remove the refrigerator handle assembly as shown in Graphic 2. Keep all parts together.

2.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown in Graphic 5.

3.Remove the door stop. Move it to the opposite side of the refrigerator door as shown in Graphic 3.

4.Attach refrigerator handle on opposite side of the refrigerator door with the two screws as shown in Graphic 2. Replace handle trim as shown.

5.Tighten all screws. Set aside the door until hinges and freezer compartment drawer are in place.

Freezer door

1.Remove freezer handle assembly as shown in Graphic 5-1. Keep all parts together.

2.Remove freezer door handle seal screw. Move to opposite side of freezer door.

3.Remove door stop. Move to opposite side of freezer door as shown in Graphic 4.

4.Attach handle to opposite side of freezer door.

5.Tighten all screws. Set aside door until bottom hinge is installed on product.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerWater Supply Requirements LocationRequirementsElectrical Requirements Recommended Grounding MethodConnect the Water Supply Reverse Osmosis Water SupplyStyle Refrigerator Doorsand Drawer Style 1-Standard DoorStyle 2-French Doors Freezer door models Remove Doors and HingesFreezer drawer models Reverse Door Standard Door optionalReplace Doors and Hinges Remove Drawer FrontReplace Drawer Front Remove and Replace Freezer DrawerDoor Swing Reversal optional Standard Door Freezer DoorStandard Door Freezer Drawer Hinge ScrewsDoor Removal & Replacement Adjust the Door Style1-Freezer Door ModelsStyle 2-Freezer Drawer Models Opening and Closing Doors Using the ControlsRefrigerator USE To Turn Off/OnWater Dispenser Crisper Humidity ControlIce Maker Dispensing WaterRefrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbMotor seems to run too much TroubleshootingRefrigerator Operation Refrigerator seems noisyTemperature and Moisture Temperature is too warmIce and Water Water Filter Certifications Water dispenser will not operate properlyProduct Data Sheets Application Guidelines/Water Supply ParametersThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesPage Sécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions D’INSTALLATIONExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Porteset tiroir du réfrigérateur Style 1-Porte standardStyle 2-Porte à deux battants Style-1 Porte standard Réinstaller la façade du tiroir Style 2-Portes à deux battantsDéposer la façade du tiroir Inversion du sens douverture des portes option Porte standard Porte du compartiment de congélationVis de charnière Charnières supérieures Portes à deux battantsAjustement de la porte Style 1-Modèles de compartiments de congélation avec porteStyle 2-Modèles de compartiments de congélation avec tiroir Utilisation DU Réfrigérateur Utilisation des commandesHumidity Control Commande dhumidité sur certains modèles Ouvertureet fermeture des portesSystème defiltrationde leau Machine à glaçonsDistributeur d’eau Distribution d’eauEntretien DU Réfrigérateur Remplacement del’ampoule d’éclairageRemplacement du filtre à eau NettoyageLe réfrigérateur ne fonctionne pas DépannageFonctionnement du réfrigérateur Le moteur semble trop tournerLe réfrigérateur semble bruyant Température et humiditéGlaçons et eau Les portes sont difficiles à ouvrirRemarque Cela indique une faible pression de leau Feuilles DE Données SUR LE Produit Système de filtration d’eau intérieurArticles Exclus DE LA Garantie Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10200283A SP PN W10200284A Whirlpool Corporation All rights reserved
Top Page Image Contents