Whirlpool W6TXNWFWT, W8TXNWMWB, W8TXEGFYB manual UsingtheControls, IceMaker, Onsomemodels- Accessory

UsingtheControls

For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to the word OFF or until the word OFF appears. Your product will not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “3”

CONDITION/REASON:	ADJUSTMENT:
REFRIGERATOR section too warm	Adjust REFRIGERATOR
- Door opened often, large amount	or TEMPERATURE
	Control one setting
of food added or room
	higher
temperature very warm
FREEZER section too warm/ice	Adjust FREEZER or
not made fast enough	TEMPERATURE Control
- Door opened often, or large	one setting higher
amount of food added or very cold
room temperature (can’t cycle
often enough)
- Heavy ice usage
REFRIGERATOR section too cold	Adjust REFRIGERATOR
- Controls not set correctly for	or TEMPERATURE
	Control one setting
your conditions
	lower
FREEZER section too cold	Adjust FREEZER or
- Controls not set correctly for	TEMPERATURE Control
	one setting lower
your conditions

Mid-setting “4”

REFRIGERATOR 4 4 FREEZER

IMPORTANT:

■Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator.

■If you add food before the refrigerator has cooled completely, your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

IceMaker

(onsomemodels- Accessory)

Turning the Ice Maker On/Off

NOTE: Do not force the wire shutoff arm up or down.

■To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.

■To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.

MAX

NORMAL

Adjusting Controls

The mid-settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. On models with two controls, adjust the refrigerator temperature first. Wait at least 24 hours between adjustments and then recheck the temperatures.

Ice Production Rate

■NORMAL Ice Production: The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period. If ice is not being made fast enough, turn the Freezer Control toward a higher (colder) number in half number steps. (For example, if the control is at 3, move it to between 3 and 4.) Wait 24 hours and, if necessary, gradually turn the Freezer Control to the highest setting, waiting 24 hours between each increase.

■MAXIMUM Ice Production (on some models): The ice maker should produce approximately 16 to 20 batches of ice in

a 24-hour period. If your refrigerator has the maximum ice production feature, push the switch to MAX.

11