SETTING COOKING TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically.
1.Once the temperature is confirmed, the symbol 
flashes.
2.Turn the “Browse” knob to display the desired cooking time.
3.To confirm the cooking time, press button 
.
SETTING END OF COOKING TIME / DELAYED START
IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol 
flashes.
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.Turn the “Browse” knob to display the time you wish cooking to end (for example 16:00).
2.Confirm the selected value by pressing button 
: the two dots of end of cooking time flash, indicating that the setting has been made correctly.
3.The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using button 
to go back, followed by the “Browse” knob to change values and button 
to confirm.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.
1.With the “Functions” knob at zero, turn the “Browse” knob to display the desired time.
2.Press button 
to start the countdown. When the set time has elapsed, the display will show “END” and an acoustic signal will sound. To mute the acoustic signal, press button 
(the time of day appears on the display).
SELECTING SPECIAL FUNCTIONS
Turn the “Functions” knob indicator to the symbol 
to access a submenu containing three special
functions.
To browse, select and start one of these functions, proceed as follows:
1.Turn the “Functions” knob to symbol 
: the display shows ”DEFROST” along with this function’s corresponding symbol.
2.Turn the “Browse” knob to scroll the list of functions: DEFROST, KEEP WARM, RISING, ECO FORCED AIR.
3.Press button 
to confirm.
EN11