Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.Turn the “Browse” knob to display “SOUND”.
2.Press 
to access the setting (ON/OFF).
3.Turn the “Browse” knob to select the desired setting and confirm by pressing button 
.
Brightness
To change the display brightness, proceed as follows:
1.Turn the “Browse” knob to display “BRIGHTNESS”.
2.Press button 
: number 1 appears on the display.
3.Turn the “Browse” knob to increase or decrease brightness and confirm by pressing 
.
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 14.
To activate the oven’s automatic cleaning cycle
1.Turn the “Functions” knob to symbol 
: the word PYRO appears on the display.
2.Press button 
to confirm your choice and start the
To select ECO 
to start the shorter programme.
During 
appears on the display. The door remains locked at the end of the cleaning cycle: “COOL” appears on the display, indicating the oven is still cooling down. When the oven cools to a safe temperature, the symbol 
switches off and the display shows “END”.
N.B.: the automatic door lock control procedure fails to execute properly, the symbol 
appears on the display. If, on the other hand, the door remains closed due to a fault in the locking system, 
and “DOOR LATCHED” appear on the display. In this case, contact the
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press 
and 
at the same time for at least 3 seconds. When activated, the functions associated with the buttons are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the above procedure. When the
EN13