Charcoal filter accessory:
Your microwave oven does not come equipped with a charcoal filter. If your microwave hood combination is being used to recirculate air, we recommend that you install the charcoal filter accessory. Replace- ment charcoal filters are available from your authorized Whirlpool service company, Part No. 4959416, or by calling the Consumer Assistance Center at
1.Remove the vent cover mounting screws.
2.Tip the cover forward, then lift out to remove.
3.if you need to remove an existing charcoal filter, lift the front of the char- coal filter. Slide the filter straight out. If you are installing a filter for the first time go to Step 4.
4.Slide a new charcoal filter into place. The filter should rest at the angle shown.
5.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws.
After replacing filters:
. Plug in power cord or turn on power supply.