Arcam AM/FM Tuner T61 manual Technical specifications, T61 Tuner

Technical specifications

T61 Tuner

FM Section

Tuning range	87.5 to 108.0MHz
Frequency steps	50kHz
Presets: total/direct access	30/16
Sensitivity (IHF) for 50dB S/N ratio	typically 3µV
Alternate channel selectivity	better than 60dB
Capture ratio	1.5dB
Frequency response	20Hz–15kHz ±1dB
Ultimate S/N ratio (CCIR) Mono	better than –75dB
Stereo	better than –70dB
Total harmonic distortion	(96MHz reference, 22.5kHz deviation at 1kHz)
Mono	better than 0.1%
Stereo	better than 0.2%
Channel separation (1kHz)	better than 40dB
Pilot tone suppression	better than 60dB
Output level	700mV at 75kHz deviation
AM Section
Tuning range: 10kHz step	530 to 1710 kHz
9kHz step	531 to 1602 kHz
Presets	16
Usable sensitivity	typically 30µV
IF rejection	> 36dB
S/N ratio (30% mod., 50mV I/P)	> 38dB
Total harmonic distortion (30% mod., 50mV I/P)	< 3%
Output level	300mV at 70% modulation
Control inputs
IR remote standard	Philips RC-5, 36kHz carrier
IR in signal level	4–15V pk-pk
Trigger operating voltage	9–15V DC
Trigger in polarity	tip positive
General
Output impedance	220Ω
Minimum recommended load	5kΩ
Power consumption	10VA
Size W x D x H	430 x 290 x 85mm
Weight net	3.8kg
Weight packed	6.0kg
Supplied accessories	FM dipole aerial
	AM loop aerial
	mains lead
	CR-389 remote control handset and batteries
E&OE

English

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

NOTE: All specification values are typical unless otherwise stated.

T61

9