Attaching the optional ice maker to a water supply
Read all directions carefully before you begin.
wWARNING
Electrical Shock Hazard
Unplug the refrigerator before installing ice maker.
Failure to do so can result in death or electrical shock.
NOTE: Your appliance dealer has a kit available with a
Cold water supply
The ice maker water valve contains a flow washer which is used as a water pressure regulator. The ice maker needs to be connected to a cold water line with water pressure limitations of
IMPORTANT:
•Use copper tubing only and check for leaks.
•Install ice maker tubing in areas where temperatures are above freezing.
Tools required:
•Standard screwdriver
•
•
•
•Hand drill or electric drill (properly grounded)
IMPORTANT:
•It may take up to 24 hours for your ice maker to begin producing ice.
•If operating the refrigerator before install- ing the water connection, turn ice maker to the OFF position to prevent operation without water.
•All installations must be in accordance with local plumbing code requirements.
Installation is not warranted by
refrigerator or ice maker
manufacturer.
20