Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it, install it, connect it to a power source, and level it. For information on how to attach the optional ice maker to a water supply, see page 20, or for information on how to reverse the door swing, see page 25.
Cleaning your refrigerator
Removing packaging materials
Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.
To remove any remaining tape or label glue:
•Rub briskly with thumb.
OR
•Apply liquid
NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.
Cleaning it before use
After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on page 29.
Installing it properly
1.Allow
2.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
3.The refrigerator can be flush against the back wall.
6