19. LIGHT BULBS
This insert uses 50 W halogen lamps (120 V, 50 W, PAR 20) (Purchase separately). Install the lamps by rotating them clockwise into their socket holder.
20. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s). 1.Insert upper end of filter into the insert (finger sized cup side).
2.Raise lower end of filter to position it into grease rail inside of hood and pull. 3.While pulling the filter, slide it under the inner retaining piece.
Replacement filters are available from your dealer. See inside label insert for size and part number.
1
2
3
HD0086 | HD0031 | 1 |
|
1) Finger sized cup
Baffle Filters
Baffle filters are available as an option. To order them, refer to the table below to find the right filter kit number for your insert. To install them, refer to instruction sheet included with baffle filter kit.
KIT NO. | INSERT MODEL |
RBFIP33 | RMIP33 |
RBFIP45 | RMIP45 |
|
|
HD0011
21. USE AND CARE
BAFFLE FILTER (TYPICAL)
Grease filters and impeller(s).
The grease filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent solution. Grease filters and impeller(s) are dishwasher safe.
Remove greasse filters by pushing them towards the back of hood and rotating downward.
Clean
Stainless steel cleaning: How to maintain its «BRIGHT LOOK»
Do:
•Regularly wash with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.
•Always clean in the direction of original polish lines.
•Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
•You may also use a specialized household stainless steel cleaner.
Don’t:
•Use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.
•Use any harsh or abrasive cleansers.
•Allow dirt to accumulate.
•Let plaster dust or any other construction residues reach the hood. During construction/renovation, cover the hood to make sure no dust sticks to stainless steel surface.
- 12 -